Config for X2Timer Flash Programming, posted by Patrick Gessler on 28 Aug 2013, 10:43
|
|
Upgrade of MMC and FPGA of ADQ412, posted by Patrick Gessler on 02 Sep 2013, 18:07
|
|
Upgrade via IPMI and HPM, posted by Patrick Gessler on 02 Sep 2013, 18:16
|
|
test2, posted by Patrick Gessler on 04 Sep 2013, 11:30
|
|
DAMC2v2 FLASH Programming parameters, posted by Patrick Gessler on 06 Sep 2013, 13:26
|
|
ADQ412 MMC Upgrade, posted by Patrick Gessler on 07 Sep 2013, 09:58
|
|
SP Devices Digitizer Serial Numbers, posted by Patrick Gessler on 07 Sep 2013, 10:00
|
|
Replaced Power Module, posted by Patrick Gessler on 07 Sep 2013, 10:24
|
|
Power cycled the whole crate, posted by Patrick Gessler on 07 Sep 2013, 10:25
|
|
Changed PCIe configuration in MCH, posted by Patrick Gessler on 07 Sep 2013, 10:27
|
|
Hotplug with X2Timer error, posted by Patrick Gessler on 07 Sep 2013, 10:30
|
|
Inserted ADQ412 modules, posted by Patrick Gessler on 07 Sep 2013, 10:32
|
|
Changed ADQ modules, posted by Patrick Gessler on 07 Sep 2013, 10:39
|
|
Replacements on AMC Test Module, posted by Patrick Gessler on 10 Sep 2013, 09:35
|
|
Programmed new MMC of AMC Test Module, posted by Patrick Gessler on 10 Sep 2013, 09:37
|
|
SP Devices Module FLASH, posted by Patrick Gessler on 10 Sep 2013, 14:59
|
|
New e1000e driver installed, posted by Patrick Gessler on 11 Sep 2013, 13:30
|
|
Network interfaces and QIP, posted by Patrick Gessler on 11 Sep 2013, 13:32
|
|
Hardware to FEC, posted by Patrick Gessler on 26 Oct 2013, 09:35
|
|
Broken MCH firmware upgrade recovery, posted by Patrick Gessler on 08 Nov 2013, 17:01
|
|
Setting up ssh key authentication, posted by Patrick Gessler on 24 Feb 2014, 15:14
|
|
Upgrade of x2timer 1.7.1 -> 1.9.1, posted by Patrick Gessler on 09 May 2014, 16:00
|
|
Upgrade of x2timer_server (2.5), posted by Patrick Gessler on 09 May 2014, 16:01
|
|
DOOCS Watchdog, posted by Patrick Gessler on 20 May 2014, 09:27
|
|
No PCIe in MCH after power cut, posted by Patrick Gessler on 20 May 2014, 09:28
|
|
Upgrade of x2timer to version 1.9.1, posted by Patrick Gessler on 22 May 2014, 09:15
|
|
Upgraded doocs x2timer server to version 2.5, posted by Patrick Gessler on 22 May 2014, 09:15
|
|
Upgraded doocs x2timer server to version 2.5, posted by Patrick Gessler on 22 May 2014, 09:16
|
|
Upgrade of x2timer to version 1.9.1, posted by Patrick Gessler on 22 May 2014, 09:17
|
|
Upgraded doocs x2timer server to version 2.9, posted by Patrick Gessler on 11 Jun 2014, 09:07
|
|
Upgraded doocs x2timer server to version 2.9, posted by Patrick Gessler on 11 Jun 2014, 09:07
|
|
Upgrade of x2timer to version 1.10.0, posted by Patrick Gessler on 11 Jun 2014, 09:08
|
|
Upgrade of x2timer to version 1.10.0, posted by Patrick Gessler on 11 Jun 2014, 09:09
|
|
Upgrade of x2timer to version 1.11.1, posted by Patrick Gessler on 30 Jun 2014, 15:50
|
|
Upgraded doocs x2timer server to version 2.8, posted by Patrick Gessler on 30 Jun 2014, 15:51
|
|
Configuration of MMC for DAMC2, posted by Patrick Gessler on 07 Jul 2014, 13:49
|
Setting up DOOCS timing and related systems, posted by Patrick Gessler on 13 Nov 2014, 08:25 
|
|
Placed a DAMC2v3 in exflutca5 for tests, posted by Patrick Gessler on 23 Jan 2015, 13:50
|
|
Removed DAMC2 again, posted by Patrick Gessler on 23 Jan 2015, 14:00
|
|
Placed DAMC2 into crate for tests and rebooted CPU, posted by Patrick Gessler on 23 Jan 2015, 14:00
|
|
Information about DESY LLRF generic PCIe drivers, posted by Patrick Gessler on 29 Jan 2015, 07:34
|
|
Crate at FeC for the DSSC-ladder test , posted by Mattia on 29 Oct 2013, 14:30
|
|
MCH Replaced, posted by Mattia on 12 Nov 2013, 13:36
|
|
MCH Repaired!, posted by Mattia on 26 Nov 2013, 11:26
|
|
Upgrade FPGA to new TDC and data transmission Protocol V1.0.0, posted by Hamed Sotoudi Namin on 20 May 2014, 09:23
|
|
Upgrade ADQs to new Frimware V1.1.0-r14958, posted by Hamed Sotoudi Namin on 16 Jul 2014, 13:36
|
|
Upgrade to new firmware, posted by Hamed Sotoudi Namin on 01 Oct 2014, 11:31
|
|
Upgrade to new firmware, posted by Hamed Sotoudi Namin on 01 Oct 2014, 11:32
|
|
Upgrade to latest version, posted by Hamed Sotoudi Namin on 02 Oct 2014, 17:30
|
|
Upgrade ADQ108 to latest version of firmware, posted by Hamed Sotoudi Namin on 06 Oct 2014, 14:24
|
|
Upgrade ADQ108 to the latest version of firmware, posted by Hamed Sotoudi Namin on 05 Dec 2014, 16:24
|
|
ADQ108 firmware correction, posted by Hamed Sotoudi Namin on 02 Jun 2015, 11:00
|
|
Crate 6 upgraded to Bootloader, posted by Hamed Sotoudi Namin on 23 Oct 2015, 11:19
|
|
FAI, posted by Frank Babies on 22 Aug 2013, 09:33
|
|
Keyboard mapping (change), posted by Frank Babies on 22 Aug 2013, 09:38
|
|
Blacklisten der Module, posted by Frank Babies on 22 Aug 2013, 09:43
|
|
Dynamischer Modul support fuer Fremdmodule, posted by Frank Babies on 22 Aug 2013, 09:47
|
|
Grub Eintragungen (boot), posted by Frank Babies on 22 Aug 2013, 09:50
|
|
Repositories hinzufuegen, posted by Frank Babies on 22 Aug 2013, 09:55
|
|
apt-get, posted by Frank Babies on 22 Aug 2013, 10:13
|
|
DOOCS in Repos per hand einbinden, posted by Frank Babies on 22 Aug 2013, 10:24
|
|
System hängt nach wiedereinschalten der Spannungsversorgung!, posted by Frank Babies on 23 Aug 2013, 15:46
|
|
ADAPI Module laufen nur auf Kernel 2.6, posted by Frank Babies on 23 Aug 2013, 15:49
|
|
NTP auf exflutca1 - 6 nachinstalliert und Konfiguriert, posted by Frank Babies on 26 Aug 2013, 11:42
|
|
xflutca4 running out of space, posted by Frank Babies on 26 Aug 2013, 16:16
|
|
exflutca1 - 2x am Tag uMTCA Processorkarte down, posted by Frank Babies on 27 Aug 2013, 09:37
|
|
Installation for Ubuntu 12.04 on exflutcaxxxx, posted by Frank Babies on 05 Sep 2013, 15:42
|
|
Serial Port to login as console changed, posted by Frank Babies on 06 Sep 2013, 09:44
|
|
Upgrade of ADQ modules, posted by Frank Babies on 11 Sep 2013, 11:33
|
|
NTP Configuration on utca6 and exflpcx18911 changed , posted by Frank Babies on 16 Sep 2013, 11:16
|
|
utca6 and pcx18911 changed configuration saved, posted by Frank Babies on 17 Sep 2013, 11:56
|
|
exflpcx18911 and exflutca6 ssh configuration changed to logged in without passwd., posted by Frank Babies on 17 Sep 2013, 12:35
|
|
utca6 rsync script, posted by Frank Babies on 18 Sep 2013, 11:07
|
|
utca6 script to read the memory size and wrote to a file, posted by Frank Babies on 19 Sep 2013, 11:24
|
|
Puppet, posted by Frank Babies on 27 Sep 2013, 11:47
|
|
utca6 LED-D30 (green top right) dark, posted by Frank Babies on 04 Nov 2013, 15:02
|
|
telnet to mch (authenticate problem), posted by Frank Babies on 07 Nov 2013, 13:27
|
|
FW Upgrade from utca5-mch, posted by Frank Babies on 08 Nov 2013, 15:17
|
|
utcaX syslog change from only client to "master - client", posted by Frank Babies on 13 Nov 2013, 14:42
|
|
exflutcadev logging changed, posted by Frank Babies on 14 Nov 2013, 12:02
|
|
exflutcadev logrotate configuration changed, posted by Frank Babies on 14 Nov 2013, 12:04
|
|
exflutcadev swappiness config changed, posted by Frank Babies on 20 Nov 2013, 08:48
|
|
procinfo on exflutcadev and exflutca6, posted by Frank Babies on 20 Nov 2013, 15:26
|
|
exflutcadev and exflutca6 disableipv6, posted by Frank Babies on 25 Nov 2013, 16:45
|
|
MMC v/w changed, posted by Frank Babies on 27 Nov 2013, 11:24
|
|
utca6 and eflutcadev, posted by Frank Babies on 02 Dec 2013, 12:50
|
|
Power supply changed, posted by Frank Babies on 03 Dec 2013, 08:09
|
|
base s/w and configuration changed on all utca's, posted by Frank Babies on 03 Dec 2013, 10:39
|
|
swapping problems on utca6 , posted by Frank Babies on 15 Jan 2014, 15:20
|
|
HDD is died., posted by Frank Babies on 24 Jan 2014, 14:36
|
|
exflutcawp78 installation finished, posted by Frank Babies on 07 Feb 2014, 07:41
|
|
Slot6 are defective, posted by Frank Babies on 07 Feb 2014, 07:45
|
|
exflutcadev died data copyed -> exflwgs06, posted by Frank Babies on 07 Feb 2014, 11:44
|
|
exflutcadev is up again, posted by Frank Babies on 19 Feb 2014, 12:14
|
|
hdd has been changed to ssd, posted by Frank Babies on 25 Feb 2014, 14:10
|
|
autofs tested, posted by Frank Babies on 26 Feb 2014, 14:48
|
|
kerberos implemented, posted by Frank Babies on 26 Feb 2014, 15:21
|
|
smartmontools installed, posted by Frank Babies on 27 Feb 2014, 09:07
|
|
gkrellm installed, posted by Frank Babies on 28 Feb 2014, 14:55
|
|
BIOS Setup and HW Setup changed, posted by Frank Babies on 05 Mar 2014, 11:35
|
|
Hardware stress test, posted by Frank Babies on 07 Mar 2014, 09:08
|
|
utca3 sudoers changed, posted by Frank Babies on 11 Mar 2014, 08:58
|
|
changed utca3 sshd configuration, posted by Frank Babies on 11 Mar 2014, 09:03
|
|
Hardware stress test, posted by Frank Babies on 11 Mar 2014, 17:39
|
|
exflutca3 + 7, posted by Frank Babies on 12 Mar 2014, 10:29
|
|
monitoring the crates, posted by Frank Babies on 19 Mar 2014, 09:25
|
|
monitorix, posted by Frank Babies on 20 Mar 2014, 08:50
|
|
The following packages are needed additionally, posted by Frank Babies on 20 Mar 2014, 08:54
|
|
Status-Mail from Monitorix, posted by Frank Babies on 21 Mar 2014, 08:22
|
|
setup and configuration done on exflutca6, posted by Frank Babies on 25 Mar 2014, 18:14
|
|
setup and configuration done on exflutca5, posted by Frank Babies on 25 Mar 2014, 18:15
|
|
setup and configuration done on exflutca4, posted by Frank Babies on 26 Mar 2014, 13:56
|
|
installed "emacs and nedit" on all crates, posted by Frank Babies on 26 Mar 2014, 15:05
|
|
syslog-ng configuration changed, posted by Frank Babies on 28 Mar 2014, 09:02
|
|
on crate 3, 4, 5, and 7 ADQ Drivers installed, posted by Frank Babies on 28 Mar 2014, 09:49
|
|
Master HD died (read only), posted by Frank Babies on 03 Apr 2014, 10:00
|
|
test pc 131.169.212.245 new monitorix version, posted by Frank Babies on 04 Apr 2014, 12:52
|
|
analysing sda hdd exflutcadev, posted by Frank Babies on 08 Apr 2014, 15:00
|
|
configuration changed and deamon started, posted by Frank Babies on 09 Apr 2014, 16:21
|
|
configuration problem on all utca's, posted by Frank Babies on 11 Apr 2014, 06:14
|
|
portmap (rpcbind) problem fixed (x2timer does not start), posted by Frank Babies on 25 Apr 2014, 08:20
|
|
monitorix replaced by ganglia, posted by Frank Babies on 30 Apr 2014, 07:48
|
|
software installation and configuration are done on exflutcafxe, posted by Frank Babies on 30 Apr 2014, 08:30
|
|
4x Telkoor 03140018 - 03140021 f/w from 2.13 to 2.17 upgraded via ipmitool, posted by Frank Babies on 07 May 2014, 10:09
|
|
PS changed on exflutca5 SN: old 0713018 new: 03140019, posted by Frank Babies on 07 May 2014, 10:15
|
|
Power Supply on exflutca6 changed SN: old 0713001 (1KW) new: 03140021 (1KW), posted by Frank Babies on 07 May 2014, 10:18
|
|
configuration changed on exflutca6, posted by Frank Babies on 03 Jun 2014, 08:37
|
|
samba share on exflutcadev added, posted by Frank Babies on 04 Jun 2014, 09:16
|
|
setup and confifuration from a new crate exflutca1 are done., posted by Frank Babies on 04 Jun 2014, 11:39
|
|
x11vnc-server installed, posted by Frank Babies on 06 Jun 2014, 13:36
|
|
bring up MCH FW to 2.14.3 Final , posted by Frank Babies on 13 Jun 2014, 11:50
|
|
bring up MCH FW to 2.14.3 Final to utca3, posted by Frank Babies on 13 Jun 2014, 11:51
|
|
bring up MCH FW to 2.14.3 Final to utca4, posted by Frank Babies on 13 Jun 2014, 11:52
|
|
bring up MCH FW to 2.14.3 Final to utca5, posted by Frank Babies on 13 Jun 2014, 11:52
|
|
bring up MCH FW to 2.14.3 Final to utca7, posted by Frank Babies on 13 Jun 2014, 11:53
|
|
bring up MCH FW to 2.14.3 Final to utcafxe, posted by Frank Babies on 13 Jun 2014, 11:54
|
|
bring up Telkor PS FW from 2.17 to 2.19 Final, posted by Frank Babies on 01 Jul 2014, 14:47
|
|
Disk Full, no Space left., posted by Frank Babies on 01 Aug 2014, 10:50
|
|
NATview installed on exflutcadev, posted by Frank Babies on 05 Aug 2014, 15:18
|
|
laser measuring setup (Toollist), posted by Frank Babies on 07 Aug 2014, 09:44
|
|
mch configuration for pcie, posted by Frank Babies on 15 Aug 2014, 11:33
|
|
bring up MCH FW to 2.15 Final to utca1, posted by Frank Babies on 18 Aug 2014, 14:38
|
|
script measuring-sync on exflutca4 installed , posted by Frank Babies on 28 Aug 2014, 10:51
|
|
script clear_measuring_20140901.sh on exflutca4 installed, posted by Frank Babies on 28 Aug 2014, 10:56
|
|
NEW SSD 120GB SAMSUNG EVO, posted by Frank Babies on 22 Sep 2014, 16:38
|
|
setup and configuration from a new crate exflutcawp74 are done., posted by Frank Babies on 30 Sep 2014, 12:48
|
|
base configuration from the MCH, posted by Frank Babies on 02 Oct 2014, 10:35
|
|
BIOS settings changed, posted by Frank Babies on 02 Oct 2014, 12:44
|
|
Base consumption on base load, CPU & SSD, maximum load, posted by Frank Babies on 06 Oct 2014, 13:29
|
|
lterm installed, posted by Frank Babies on 10 Oct 2014, 12:37
|
|
jddd, posted by Frank Babies on 10 Oct 2014, 12:51
|
|
AMC725 VADATECH Test, posted by Frank Babies on 27 Oct 2014, 12:54
|
|
new Kernel 3. 5.0-46 buggy rool-back to 3.5.0-23 !!!, posted by Frank Babies on 12 Nov 2014, 10:52
|
|
I tested (Temperatur) wp74 and exflutca6, posted by Frank Babies on 14 Nov 2014, 16:11
|
|
10GB Ethernet test, posted by Frank Babies on 01 Dec 2014, 11:08
|
|
Kernel changed to 3.13.0-45-generic on tca1, 3 and 4, posted by Frank Babies on 06 Feb 2015, 08:15
|
|
nfs-kernel-server installed and configured, posted by Frank Babies on 19 Feb 2015, 11:26
|
|
changing configuration on all exflutcaX crates, posted by Frank Babies on 19 Feb 2015, 11:30
|
|
exflutcadev updated complet, posted by Frank Babies on 10 Mar 2015, 12:44
|
|
changing network entries for exflutca7, posted by Frank Babies on 11 Mar 2015, 15:03
|
|
Proxy for all exflutca...., posted by Frank Babies on 01 Apr 2015, 15:03
|
|
Soft and Firmware upgrade on wp78, posted by Frank Babies on 21 Apr 2015, 14:33
|
|
ipmi over net, posted by Frank Babies on 21 Apr 2015, 15:15
|
|
MCH F/W changed on exflutca3, posted by Frank Babies on 21 Apr 2015, 16:05
|
|
complete Soft- and Firmware upgrade on a Crate, posted by Frank Babies on 23 Apr 2015, 08:31
|
|
MCH Configuration on exflutca3 changed., posted by Frank Babies on 22 Jun 2015, 16:24
|
|
Service-Laptop installation from TWINCAD, posted by Frank Babies on 14 Sep 2015, 07:40
|
|
Problem is / was the AMC Cards lost the PCIe Bus connection, posted by Frank Babies on 14 Sep 2015, 07:44
|
|
Ubuntu 16.04 Kernel 4.4.0-21, posted by Frank Babies on 03 Jun 2016, 16:26
|
|
Updated x2timer firmware verion 1.7.0, posted by Bruno Jesus Fernandes on 05 Dec 2013, 16:01
|
|
Changing firmware for DAMC2, posted by Bruno Fernandes on 06 Mar 2015, 09:15
|
|
IPMI tool cannot write fru file from the same exflutca, posted by Balakumaar Baskaran on 13 Oct 2014, 10:53
|
|
installed ADQ drivers, posted by Andreas Beckmann on 26 Mar 2014, 15:08
|
|
Installed LDAP2 development package, posted by Andreas Beckmann on 08 Apr 2014, 08:39
|
|
Installed GNU debugger, posted by Andreas Beckmann on 05 May 2014, 13:31
|
|
Update of ADQ drivers (r15020), posted by Andreas Beckmann on 21 May 2014, 15:05
|
|
Update of ADQ drivers (r15020), posted by Andreas Beckmann on 22 May 2014, 08:41
|
|
Update of x2timer server, posted by Andreas Beckmann on 14 Aug 2014, 10:56
|
|
Upgrade of x2timer to version 1.11.1, posted by Andreas Beckmann on 21 Aug 2014, 11:36
|
|
Upgraded doocs_x2timer_server to 1.0.69, posted by Andreas Beckmann on 21 Aug 2014, 11:37
|
|
Local MySQL/TANGO Installation, posted by Andreas Beckmann on 04 Feb 2015, 08:56
|
|
Installed missing packages for Karabo, posted by Andreas Beckmann on 10 Mar 2015, 16:03
|
|
Installed ICU package, posted by Andreas Beckmann on 12 Mar 2015, 18:17
|
|
Removed ICU package , posted by Andreas Beckmann on 20 Mar 2015, 11:40
|