ID |
Date |
Author |
Location |
Severity |
Subject |
Text |
|
334
|
14 Jul 2017, 12:44 |
Martin Dommach | XTD9 | Problem | Fast Valves in XTD9 | Dear all,
the fast valves in XTD9 were causing
some trouble. From time to time they collect |
|
136
|
11 Apr 2017, 18:29 |
Raśl Villanueva-Guerrero | XTD2 | Feedback | Fast Valve Test - SUCCESFUL | The Fast Valve test has been positively
tested.
It has been consider that the signal |
|
447
|
11 Jan 2018, 15:17 |
Bruno Fernandes | General | Information | FXE/SPB/PPL Timing Update | Hi everyone,
after talking with the responsabile
people, here's the timetable for the |
|
492
|
25 Mar 2018, 10:57 |
Gerd Wellenreuther | XHEXP | Problem | FXE emergency power-off has been triggered | Dear all,
apparently the Emergency Power-Off
at FXE was triggered at around 10:00 - 10:30 |
|
443
|
10 Jan 2018, 14:54 |
Dennis Goeries | General | Information | FXE Mono | Hi,
the FXE Mono's won't
be available via Karabo from 15.30 onwards |
|
435
|
14 Dec 2017, 09:12 |
Lewis Batchelor | XTD2 | Information | FXE Collimating CRL | The LENS_3X limit switch (switched when
driving towards the chamber center) is broken
and must be replaced, hence further work |
|
476
|
20 Feb 2018, 12:29 |
Eric Boyd | General | Information | FXE Beam Shutter Key | The FXE beamshutter key has been installed
into the interlock system after satisfactory
completion of the FXE Chicane and Radiation |
|
156
|
21 Apr 2017, 12:28 |
Raśl Villanueva-Guerrero | XTD9 | Problem | FAILED - Interlock test of the whole gas section in XTD9 - NOT SUCCESSFUL | Due to problems and lack of support
of CAS for accessing the devices in XTD9
tunnel through KARABO we couldn´t run |
|
157
|
21 Apr 2017, 13:23 |
Raśl Villanueva-Guerrero | XTD9 | Problem | FAILED - Interlock test of the whole gas section in XTD9 - NOT SUCCESSFUL |
|
|
158
|
21 Apr 2017, 13:35 |
Raśl Villanueva-Guerrero | XTD9 | Problem | FAILED - Interlock test of the whole gas section in XTD9 - NOT SUCCESSFUL |
|
|
453
|
17 Jan 2018, 16:53 |
Bruno Fernandes | General | Information | Event #16 back to 1Hz | Dear all,
I communicated today on the 13h
meeting that the Trigger #16 was back to |
|
454
|
19 Jan 2018, 16:06 |
Bruno Fernandes | General | Information | Event #16 back (for good) to 10Hz | Event trigger #16 is now back to 10Hz and
it will still that way. |
|
141
|
13 Apr 2017, 10:15 |
Alessandro Silenzi | General | Problem | EtherCAT loop broken for Vacuum loop | The EtherCAT loop for the vacuum PLC is
interrupted at crate 1.6 (XTD2).
This triggered all Beckhoff Terminals |
|
500
|
09 Apr 2018, 11:50 |
Adriano Violante | XHEXP | Information | Emergency off test in SPB/FXE - Update | Due to some delay in the installation of
some necessary cables, the emergency power
off test foreseen for today 06.04. in the |
|
507
|
13 Apr 2018, 09:40 |
Adriano Violante | XHEXP | Information | Emergency off test in SPB/FXE | Emergency power test will be performed
at the following dates:
FXE - Mon. 16.04. |
|
510
|
16 Apr 2018, 12:38 |
Adriano Violante | XHEXP | Information | Emergency off test in FXE - Update and next steps | Dear all,
I was just informed by Ulf Brueggmann |
|
193
|
29 Apr 2017, 10:04 |
Hugo Silva Santos | General | Information | ERRATA: CAS - On-Call Duty Planning - Valerii, Gabriele and Wajid | Dear All,
Still in time, I would like to correct
out schedule. |
|
114
|
07 Apr 2017, 11:12 |
NEREA JARDON | General | Information | EPS loop | Dear all, I will update EPS loop in order
to integrate new hardware changes. I will
post a new entry when the work is done. |
|
115
|
07 Apr 2017, 11:57 |
NEREA JARDON | General | Information | EPS loop | Dear all, EPS loop is again up and running.
Thank you! |
|
134
|
11 Apr 2017, 15:38 |
NEREA JARDON | General | Information | EPS loop | Dear all,
The EPS loop would be stopped, in
order to correct some issues with the hardware |
|