ID |
Date |
Author |
Group |
Subject |
Text |
|
49
|
21 Feb 2023, 23:07 |
Jan-Etienne Pudell | | shift summary | - Tunnel + experimental hutch alignment
(Mirrors, CRL1 and CRL2)
- Aligned main devices: Optics |
|
48
|
20 Feb 2023, 06:46 |
Ben, Manuel | SCS | Night Shift Summary | Achievements
Measured self-refreenced
XAS spectra with single color baem at the |
|
47
|
19 Feb 2023, 23:25 |
Motoaki Nakatsutsumi, Oliver Humphries, Carsten Baehtz | HED | Shift summary 2023-02-19 | 8.2 keV, 750 uJ.
Short summary
- Optimize the downstream nanofocus |
|
46
|
19 Feb 2023, 23:28 |
Richard Bean | SPB | Shift summary | X-ray delivery
9.3 keV, 120 pulses
Good
Beam Stability -~1mJ
Achievements/Observations |
|
45
|
19 Feb 2023, 19:51 |
bouffetier | HED | late shift summary | 19 Feb 2023,15:30 Shift handover
Runs will be added in the general
Elog for data runs and acqusitions (Elog-4) |
|
44
|
19 Feb 2023, 05:29 |
Motoaki Nakatsutsumi, Carsten Baehtz, Olver Humphries | HED | Shift summary - night shift 2023-02-18 | 18 Feb 2023, 23:37 Together with the last
shift members, we continued shooting laser
on Cu 25 um thick wire for another 2 hours. |
|
43
|
19 Feb 2023, 08:06 |
Erik Brambrink | HED | Day shift summary | 19 Feb 2023, 08:08 Hand over from night
shift
Added polarizer in the PAM beam |
|
42
|
19 Feb 2023, 00:34 |
Richard Bean | SPB | Shift summary | X-ray delivery
9.3 keV, 1-120 pulses,
good
stabiltiy, lowish flux ~900uJ, but experimental |
|
41
|
18 Feb 2023, 00:32 |
Motoaki Nakatsutsumim, Carsten Baehtz, Olly Humphries | HED | Shift summary - night shift 2023-02-17 | Ealier shift members managed to get a good
quality image on Optique Peter by imaging
the sample plane to the Optique Peter with |
|
40
|
18 Feb 2023, 07:06 |
Benjamin, Manuel, Ricardo | SCS | Night Shift summary | Achievements
Used scanning of liquid
jet to improve S/N
Measured x-ray |
|
39
|
17 Feb 2023, 17:16 |
bouffetier | HED | Late shift activities | 17 Feb 2023, 17:15 : We centered Pin in
the FEL beam and then imaged this pin with
ILM and FSI to get common references. |
7x |
38
|
17 Feb 2023, 02:24 |
Laurent Mercadier, Luigi Adriano | SCS | late shift summary | 2 color mode
Achievements
Fluence scan
delay |
|
37
|
16 Feb 2023, 23:01 |
Trey Guest | | End of Shift | Staff: KK, RB, TG, AS, CK
X-ray delivery
9.3 keV, 1-120 pulses,
Optical |
|
36
|
16 Feb 2023, 23:15 |
Chan Kim | SPB | Shift summary | X-ray delivery
9.3 keV, 1-120 pulses
Optical
laser delivery |
|
35
|
16 Feb 2023, 14:04 |
Frederik Wolff-Fabris | XO | SA2 status | Data for the Horizontal jitter at the HED
Pop-In was observed during beam delivery
on cw05 (03-05.Feb) and cw07 (14-16.Feb) |
|
34
|
16 Feb 2023, 07:17 |
Chan Kim | SPB | Shift summary | Shift summary 15.2.2023 (Wednesday)
X-ray delivery
9.3 keV, 1-200 pulses, |
|
33
|
15 Feb 2023, 23:05 |
Luigi, Laurent | SCS | late shift summary 2nd day | Achievememts:
optimised the beam rep
rate to value of 140KHz for a better signal
changed |
|
32
|
15 Feb 2023, 06:54 |
Benjamin van Kuiken | SCS | Night Shift Summary | Achievements
Located flat jet and attempted
measurement of XAS at several incident energies |
|
31
|
15 Feb 2023, 01:40 |
Laurent Mercadier, Luigi Adriano | SCS | late shift shift summary | Achievements
Two color mode established
with 11.5 GeV, 1.335 keV col1, 1.27 keV col2
Beam |
|
30
|
13 Feb 2023, 19:02 |
Frederik Wolff-Fabris | PRC | Issue | SA3 SCS exit slit: the upper blade was
detached from the motor and fall into closed
position. Maurizio V. and F. Wolff-Fabris tried |
|
|