| ID |
Date |
Author |
Location |
Severity |
Subject |
|
42
|
10 Feb 2017, 15:07 |
Tobias Haas | General | Information | Updated Components List |
Added Diagnostic Screen for SPB and changed PRIO for DPS - XGM - DPS in XTD9 to high as discussed during the S1R meeting |
| Attachment 1: Componets-XTD2-9-new.xlsx
|
|
44
|
10 Feb 2017, 16:34 |
Tobias Haas | General | Information | Updated Components List |
|
| Attachment 1: Components-XTD2-9.xlsx
|
|
50
|
17 Feb 2017, 12:40 |
Thomas Tschentscher | General | Information | Updated Component status list |
| See the updated component status list for XTD2 and XTD9 tunnels. As discussed at the SASE1 readiness mtg this morning. Yellow fields indicate new/changed entries. Please let me/THaas know if there are errors or further changes to be reported.
I also entered the SASE1 instruments now a 'High Priority' items. However, we may need to adapt the table for These entries as the work flow seems different. |
| Attachment 1: 170217_Components-XTD2-9.xlsx
|
|
39
|
09 Feb 2017, 13:57 |
Tobias Haas | General | Information | Update of installation list for tomorrow's S1R Meeting |
Please check if correct. I mark all newly done things in yellow! |
| Attachment 1: Componets-XTD2-9.xlsx
|
|
88
|
24 Mar 2017, 15:24 |
Tobias Haas | General | Information | Update of component priority list after weekly meeting |
|
| Attachment 1: 170324-Tunnel-Components-Priority-list.xlsx
|
|
54
|
24 Feb 2017, 16:33 |
Tobias Haas | General | Information | Update of component list after weekly meeting |
|
| Attachment 1: 240217_Components-XTD2-9.xlsx
|
|
90
|
31 Mar 2017, 15:00 |
Tobias Haas | General | Information | Update of component list after weekly meeting |
|
| Attachment 1: 170331-Tunnel-Components-Priority-list.xlsx
|
|
67
|
10 Mar 2017, 11:15 |
Tobias Haas | General | Information | Update of Tunnel Component Priority List after SASE1 Readiness Meeting |
|
| Attachment 1: Components-Priority-list.xlsx
|
|
70
|
10 Mar 2017, 12:53 |
Tobias Haas | General | Information | Update of Tunnel Component Priority List after SASE1 Readiness Meeting |
Note that due to a bug in the elog the name appeared wrongly in my previous message. In general: Avoid underscores in the file names! |
| Attachment 1: 170310-Tunnel-Components-Priority-list.xlsx
|
|
252
|
19 May 2017, 12:46 |
Monica Aresté | General | Information | Update of Instrument component priority list |
|
Find attached the Instrument Component priority list discussed this morning.
Regards,
Monica
|
| Attachment 1: 170519_Instrument_Components-Priority-list.xlsx
|
|
227
|
12 May 2017, 12:26 |
Monica Aresté | General | Information | Update of Instrument component priority list |
Find attached the Instrument Component priority list discussed this morning.
Regards,
Monica |
| Attachment 1: 170512_Instrument_Components-Priority-list.xlsx
|
|
9
|
09 Nov 2016, 15:36 |
Tobias Haas | General | Information | Update of Component list |
I have included the status columns provided by Alessandro and Sandor in the component list. Please find it in the usual location here: http://tinyurl.com/zn7otsa |
| Attachment 1: elog.tiff
|
|
58
|
03 Mar 2017, 16:40 |
Tobias Haas | General | Information | Update of Component Priority list after weekly meeting |
|
| Attachment 1: 170303_Components-Priority-list.xlsx
|
|
37
|
03 Feb 2017, 08:48 |
Jan Grünert | XTD2 | Information | Update WP74 cabling status (w5) |
Information posted on behalf of Torben Falk (WP74 cabling)
Wir haben nun alle Kabel für den XGM in XTD2 am Beckhoff angeschlossen.
Alle Leitungen sind bereit zum einstecken in die jeweiligen Komponenten.
Es sind alle "valve connection boxes" angeschlossen, bis auf eine. Da besteht noch klärungsbedarf mit Florian. (ist aber auch schon am Beckhoff angeschlossen, nur device-seitig noch nicht)
Dementsprechend wäre der lokale Beckhoff Test möglich.
Ich habe mit Tobias Freyermuth geredet und der hat für den lokalen Beckhoff Test leider erst mitte / ende nächster Woche zeit..
Außerdem haben wir in XTD9 Kabel für den HiREX gewechselt. Da waren ein paar Kabel zu kurz. Die haben wir nun mit passenden ersetzt.
Andreas hat sich für die Timing verkabelung um die nötigen Kabel / Material gekümmert, die gebrauchten Längen habe ich ausgemessen und ihm zukommen lassen. Das Material soll Anfang nächster Woche da sein.
|
|
446
|
11 Jan 2018, 11:04 |
Bruno Fernandes | General | Information | Update Timing Firmware/Doocs Server |
Dear all,
an update of the Timing boards firmware and doocs server is require. This operation should not take more than 10 minutes per device; during this time no timing signals will be generate (clocks/triggers/bunch patterns/etc.). Naturally, problems may occur during this update which will lead to increase down time.
I will perform this necessary update in the devices locates in SASE1 and SASE3 tunnels today at 11H30. If somebody sees a problem please contact me.
Concerning the devices in the Experiment Rack Rooms, I will contact a responsible person to schedule a time slot where this update can be perform. If are one of these people contact me. |
|
449
|
12 Jan 2018, 14:34 |
Bruno Fernandes | General | Information | Update Timing Firmware/Doocs Server |
Dear all,
with the exception of one board, all boards in SASE1, SASE3, FXE, SPB and PPL have been successfully updated. All Timing boards are now running firmware v1.24.0. The doocs-x2timer-server has also been updated in all CPUs; running version is 7.8.
The problem occur in the Timing System of rack 1.2 located at XTD2. The MCH board is not reachable via ssh/telnet/web interface; thus I am not able to power cycle the timing board, which would make the hardware load the latest version. The board is currently running (i.e. generating all the timing signals) but with an older hardware version. During the next week this problem will be tackle this problem with a quick visit to the rack.
Cheers. |
|
182
|
27 Apr 2017, 09:34 |
Tobias Freyermuth | XTD2 | Information | Update MOV loop |
Hi all,
in order to integrate the CRL in XTD2 I am going to update the motion loop.
I will let you know as soon as this is done.
Cheers,
Tobias |
|
101
|
04 Apr 2017, 18:49 |
Alessandro Silenzi | General | Information | UPDATE on Temperature sensors for EPS loop |
Here are the updated values for the temperature sensors inn the EPS loop.
Now Thermocouples work!
FXE_XTD9_COLB/TSENS/T1 23.1
FXE_XTD9_COLB/TSENS/T2 23.2
FXE_XTD9_PBLM/TSENS/BLADE_BOTTOM 22.94
FXE_XTD9_PBLM/TSENS/BLADE_LEFT 23.0
FXE_XTD9_PBLM/TSENS/BLADE_RIGHT 23.0
FXE_XTD9_PBLM/TSENS/BLADE_TOP 22.98
SA1_XS3_SHUT/TSENS/T1 4.0
SA1_XS3_SHUT/TSENS/T2 4.0
SA1_XS3_SHUT/TSENS/T3 4.0
SA1_XS3_SHUT/TSENS/T4 4.0
SA1_XTD2_ABS/TSENS/T1 19.5
SA1_XTD2_ABS/TSENS/T2 19.6
SA1_XTD2_ATT/TSENS/A1 30.7
SA1_XTD2_ATT/TSENS/A2 1372.0
SA1_XTD2_ATT/TSENS/A3 30.3
SA1_XTD2_ATT/TSENS/A4 31.02
SA1_XTD2_ATT/TSENS/A5 31.96
SA1_XTD2_ATT/TSENS/A6 31.11
SA1_XTD2_ATT/TSENS/A7 30.75
SA1_XTD2_ATT/TSENS/A8 31.0
SA1_XTD2_ATT/TSENS/A9 31.4
SA1_XTD2_COLA/TSENS/T1 1372.0
SA1_XTD2_COLA/TSENS/T2 1372.0
SA1_XTD2_COLB/TSENS/T1 27.8
SA1_XTD2_COLB/TSENS/T2 1372.0
SA1_XTD2_CRL/TSENS/LENS_10_T1 850.0
SA1_XTD2_CRL/TSENS/LENS_10_T2 850.0
SA1_XTD2_CRL/TSENS/LENS_1_T1 850.0
SA1_XTD2_CRL/TSENS/LENS_1_T2 850.0
SA1_XTD2_CRL/TSENS/LENS_2_T1 850.0
SA1_XTD2_CRL/TSENS/LENS_2_T2 850.0
SA1_XTD2_CRL/TSENS/LENS_3_T1 850.0
SA1_XTD2_CRL/TSENS/LENS_3_T2 850.0
SA1_XTD2_CRL/TSENS/LENS_4_T1 850.0
SA1_XTD2_CRL/TSENS/LENS_4_T2 850.0
SA1_XTD2_CRL/TSENS/LENS_5_T1 850.0
SA1_XTD2_CRL/TSENS/LENS_5_T2 850.0
SA1_XTD2_CRL/TSENS/LENS_6_T1 850.0
SA1_XTD2_CRL/TSENS/LENS_6_T2 850.0
SA1_XTD2_CRL/TSENS/LENS_7_T1 850.0
SA1_XTD2_CRL/TSENS/LENS_7_T2 850.0
SA1_XTD2_CRL/TSENS/LENS_8_T1 850.0
SA1_XTD2_CRL/TSENS/LENS_8_T2 850.0
SA1_XTD2_CRL/TSENS/LENS_9_T1 850.0
SA1_XTD2_CRL/TSENS/LENS_9_T2 850.0
SA1_XTD2_DPS1/TSENS/FLOW 20.3
SA1_XTD2_DPS1/TSENS/RETURN1 20.3
SA1_XTD2_DPS1/TSENS/RETURN2 20.1
SA1_XTD2_DPS3/TSENS/FLOW 44.2
SA1_XTD2_DPS3/TSENS/RETURN1 41.6
SA1_XTD2_DPS3/TSENS/RETURN2 44.2
SA1_XTD2_PBLM/TSENS/BLADE_LEFT 32.8
SA1_XTD2_PBLM/TSENS/BLADE_RIGHT 33.7
SA1_XTD2_PSLIT/TSENS/BLADE_BOTTOM_B4C 19.7
SA1_XTD2_PSLIT/TSENS/BLADE_BOTTOM_W 19.4
SA1_XTD2_PSLIT/TSENS/BLADE_LEFT_B4C 18.6
SA1_XTD2_PSLIT/TSENS/BLADE_LEFT_W 18.6
SA1_XTD2_PSLIT/TSENS/BLADE_RIGHT_B4C 19.3
SA1_XTD2_PSLIT/TSENS/BLADE_RIGHT_W 19.2
SA1_XTD2_PSLIT/TSENS/BLADE_TOP_B4C 19.4
SA1_XTD2_PSLIT/TSENS/BLADE_TOP_W 19.4
SA1_XTD9_PBLM/TSENS/BLADE_LEFT 23.68
SA1_XTD9_PBLM/TSENS/BLADE_RIGHT 24.13
SPB_XTD9_COLB/TSENS/T1 22.9
SPB_XTD9_COLB/TSENS/T2 1372.0
SPB_XTD9_DPS1/TSENS/FLOW 850.0
SPB_XTD9_DPS1/TSENS/RETURN1 850.0
SPB_XTD9_DPS1/TSENS/RETURN2 850.0
SPB_XTD9_DPS2/TSENS/FLOW 850.0
SPB_XTD9_DPS2/TSENS/RETURN1 850.0
SPB_XTD9_DPS2/TSENS/RETURN2 850.0
SPB_XTD9_PBLM/TSENS/BLADE_BOTTOM 23.21
SPB_XTD9_PBLM/TSENS/BLADE_LEFT 23.01
SPB_XTD9_PBLM/TSENS/BLADE_RIGHT 23.19
SPB_XTD9_PBLM/TSENS/BLADE_TOP 23.12
SPB_XTD9_SHUT/TSENS/T1 1372.0
SPB_XTD9_SHUT/TSENS/T2 1372.0
SPB_XTD9_SHUT/TSENS/T3 1372.0
SPB_XTD9_SHUT/TSENS/T4 1372.0
|
|
289
|
12 Jun 2017, 13:21 |
Monica Aresté | General | Information | Tunnel's schedule updated |
Last information is that tomorrow Fire brigade will come to inspect the tunnels, therefore all tunnels will be open from 7:00 to 15:00.
H. Sinn inform that XTD9 will not be searched until Wednesday morning.
Tunnel's schedule:
- Monday 12th June: XTD10 closed, XTD9 open
- Tuesday 13th June: from 7:00 to 15:00 all open
|
|
288
|
12 Jun 2017, 11:17 |
Monica Aresté | General | Information | Tunnel's schedule |
|
Tunnel's schedule clarification:
- Monday 12th June: XTD10 closed, XTD9 open
- Tuesday 13th June: from 7:00 to 15:00
all XTD9 and XTD10 open (all is incorrect, I mean XTD9 and XTD10).
Someone pointed out that XTD2 maintenance for tomorrow is cancelled and XTD2 wil be closed.
|