| ID |
Date |
Author |
Location |
Severity |
Subject |
Text |
 |
|
47
|
15 Feb 2017, 20:10 |
Alessandro Silenzi | General | Feedback | Current Vacuum Status | The PLC is still not completely error free.
It is considerably better performing
than the last days: |
|
|
48
|
15 Feb 2017, 20:20 |
Alessandro Silenzi | General | Feedback | Motion loop status | The motion loop is as of 18:40 online.
the current status of the devices
as seen by the Karabo is shown in the attachment: |
|
|
49
|
17 Feb 2017, 09:56 |
Alessandro Silenzi | General | Feedback | Motion loop feedback | Quick feedback during the meeting:
- 63 Devices
- 29 Motors |
|
|
78
|
16 Mar 2017, 13:34 |
Torben Falk | General | Feedback | Wiring status | Wiring status SASE 1:
Wiring progress:
Internal wiring of the |
|
|
104
|
05 Apr 2017, 14:14 |
Andreas Koch | XTD9 | Feedback | Please inform on rack status 1.18 | The rack 1.18 in XTD9 is not operational
at the moment because Nicola is working on
it. Nerea, Tobias or others let me know when |
|
|
118
|
07 Apr 2017, 17:43 |
Tobias Freyermuth | General | Feedback | Hotfix for all loops (VAC, MOV, EPS) deployed |
Normal
0
|
|
|
119
|
07 Apr 2017, 17:54 |
Tobias Freyermuth | General | Feedback | Hotfix for all loops (VAC, MOV, EPS) deployed |
|
|
|
135
|
11 Apr 2017, 17:44 |
Raśl Villanueva-Guerrero | XTD2 | Feedback | XTD2 Complete Gas Section (DPS-XGM-DPS) Isolation Interlock tested - SUCCESSFUL | The interlock definition for complete
isolation of the whole section based on high
pressure signal has been successfully tested. |
|
|
136
|
11 Apr 2017, 18:29 |
Raśl Villanueva-Guerrero | XTD2 | Feedback | Fast Valve Test - SUCCESFUL | The Fast Valve test has been positively
tested.
It has been consider that the signal |
|
|
137
|
11 Apr 2017, 18:38 |
Raśl Villanueva-Guerrero | XTD2 | Feedback | Beam Stopper and V0 valve test - SUCCESSFUL | The Interlock conditions for these
two components has been positively tested
but not exhaustively done: |
|
|
145
|
13 Apr 2017, 16:21 |
Tobias Freyermuth | General | Feedback | VAC loop up and running agian | The first EtherCAT coupler in 1.7 VAC was
broken and is replaced now. The loop is up
and running again. |
|
|
163
|
21 Apr 2017, 15:30 |
Tobias Freyermuth | XTD9 | Feedback | SASE EPS RACK 1.14 connected |
The
EPS-loop is now complete again. |
|
|
179
|
26 Apr 2017, 19:21 |
Raśl Villanueva-Guerrero | XTD9 | Feedback | XTD9 Complete Gas Section (DPS-XGM-DPS) Isolation Interlock tested - SUCCESFUL | Dear all,
Finally the tests were run with the
expected results: Pressure thresholds for |
|
|
204
|
03 May 2017, 14:38 |
Raśl Villanueva-Guerrero | XTD9 | Feedback | Gas Section Interlock on XTD9 - Shut off valve also operative | Dear all,
during the test run today by our
colleagues of WP74, the interlock condition |
|
|
238
|
16 May 2017, 15:59 |
Andreas Koch | XTD2 | Feedback | Request for imager checks | Since tomorrow there is no beam I want
to use the time for some checks of the imagers
in XTD2. Please, let the motion loop up if |
|
|
249
|
18 May 2017, 16:32 |
Andreas Koch | XTD2 | Feedback | Imager status | After the update of the PLC firmware, the
imagers are in following status:
SR: auto gain off seems to work, |
|
|
Draft
|
14 Sep 2018, 13:38 |
Adriano Violante | XHEXP | | | |
|