| ID |
Date |
Author |
Location |
Severity |
Subject |
Text |
 |
|
32
|
02 Feb 2017, 14:29 |
Richard Bean | XTD9 | Information | SPB/SFX updates to component table | Table updated with status of SPB/SFX devices
at end of XTD9 in preparation for SASE1 readiness
meeting on 03.02.17 |
|
|
51
|
24 Feb 2017, 15:14 |
Martin Dommach | XTD9 | Information | work on FXE distribution mirror chamber | Dear all,
on Monday, 27th in the morning we
will start with preparation work for the |
|
|
52
|
24 Feb 2017, 15:15 |
Martin Dommach | XTD9 | Information | work on FXE distribution mirror chamber | Dear all,
on Monday, 27th in the morning we
will start with preparation work for the |
|
|
61
|
07 Mar 2017, 10:21 |
NEREA JARDON | XTD9 | Information | XTD9-DPS | Dear all,
Tomorrow morning, 08th of March at
09.30h. I will be in the tunnel doing interlock |
|
|
63
|
08 Mar 2017, 13:11 |
NEREA JARDON | XTD9 | Information | Interlock tests DPS | The interlock test in XTD9-DPS has been
done. The Vacuum PLC is again available for
Karaboo. |
|
|
104
|
05 Apr 2017, 14:14 |
Andreas Koch | XTD9 | Feedback | Please inform on rack status 1.18 | The rack 1.18 in XTD9 is not operational
at the moment because Nicola is working on
it. Nerea, Tobias or others let me know when |
|
|
106
|
05 Apr 2017, 16:24 |
Nicola Coppola | XTD9 | Information | alio monocromator tests | test finshed.
both stages were moved.
voltage value and position read out |
|
|
151
|
19 Apr 2017, 11:47 |
NEREA JARDON | XTD9 | Information | Motion loop | Dear all,
Today from 13:30h Mahadi and
Natalia will be doing local tests in the |
|
|
156
|
21 Apr 2017, 12:28 |
Raśl Villanueva-Guerrero | XTD9 | Problem | FAILED - Interlock test of the whole gas section in XTD9 - NOT SUCCESSFUL | Due to problems and lack of support
of CAS for accessing the devices in XTD9
tunnel through KARABO we couldn´t run |
|
|
157
|
21 Apr 2017, 13:23 |
Raśl Villanueva-Guerrero | XTD9 | Problem | FAILED - Interlock test of the whole gas section in XTD9 - NOT SUCCESSFUL |
|
|
|
158
|
21 Apr 2017, 13:35 |
Raśl Villanueva-Guerrero | XTD9 | Problem | FAILED - Interlock test of the whole gas section in XTD9 - NOT SUCCESSFUL |
|
|
|
160
|
21 Apr 2017, 14:36 |
Tobias Freyermuth | XTD9 | Information | SASE EPS RACK 1.14 disconnect | We have to disconnect the EPS crate in
RACK 1.14 in order to check the interface
to the MPS. |
|
|
163
|
21 Apr 2017, 15:30 |
Tobias Freyermuth | XTD9 | Feedback | SASE EPS RACK 1.14 connected |
The
EPS-loop is now complete again. |
|
|
168
|
25 Apr 2017, 13:49 |
Raśl Villanueva-Guerrero | XTD9 | Information | XTD9 Complete Gas Section (DPS-XGM-DPS) Isolation Interlock tested - Not Working (yet) | After some minor issues, the first
test has been done today and the interlock
wasn´t triggered despite the conditions |
|
|
178
|
26 Apr 2017, 18:34 |
Jan Grünert | XTD9 | Problem | SA1-VAC loop down (only XTD9) and later restarted | Since around 17h30 all XTD9 VAC loop is
in error. It came back in karabo around 17h50.
XTD2 not affected. |
|
|
179
|
26 Apr 2017, 19:21 |
Raśl Villanueva-Guerrero | XTD9 | Feedback | XTD9 Complete Gas Section (DPS-XGM-DPS) Isolation Interlock tested - SUCCESFUL | Dear all,
Finally the tests were run with the
expected results: Pressure thresholds for |
|
|
194
|
02 May 2017, 10:05 |
Tobias Freyermuth | XTD9 | Information | PBLM Motor drivers in PreOP | Hi all,
due to ongoing tests with the PBLM |
|
|
195
|
02 May 2017, 10:56 |
Harald Sinn | XTD9 | Information | Status of Vacuum System | XTD2: All gate valves are now OK (not interlocked)
after re-instantiating and re-setting the
XGM_DP_OK. |
|
|
200
|
03 May 2017, 11:15 |
Raśl Villanueva-Guerrero | XTD9 | Information | Correction to plans for Vacuum (e-log message n3. 199) in XTD9 | Dear all,
it seems that this morning was somehow
a misunderstanding. The XTD9 Gas Section |
|
|
204
|
03 May 2017, 14:38 |
Raśl Villanueva-Guerrero | XTD9 | Feedback | Gas Section Interlock on XTD9 - Shut off valve also operative | Dear all,
during the test run today by our
colleagues of WP74, the interlock condition |
|