| ID |
Date |
Author |
Group |
Subject |
Text |
 |
|
466
|
25 Jan 2024, 14:57 |
Antje Trapp | XRO | end of shift summary | It was possible to align to HED in parasitic
mode to seeding tests
mirror horizontal position (coating |
|
|
467
|
26 Jan 2024, 15:24 |
Antje Trapp | XRO | end of shift summary | Vertical motors of M3 now calibrated in
first iteration and gemetrical neutral calibrated
to 0 in motor settings!!! |
|
|
468
|
26 Nov 2022, 10:40 |
Wolfgang Freund | XPD | Diamond detector / DDM commissioning | beam: 30 keV / 30 uJ
reduce to single bunch for insertion
put FEL imager in |
|
|
1
|
16 Jan 2023, 11:33 |
Theophilos Maltezopoulos | XPD | Status | I started the upstream XGMs in XTD2, XTD1,
and XTD10. |
|
|
5
|
21 Jan 2023, 16:38 |
Jan Gruenert | XPD | Analyze and quantify the mispositioning of the new 4mm-aperture behind the undulator | Goal: Analyze and quantify the
mispositioning of the new 4mm-aperture behind
the undulator |
|
|
20
|
08 Feb 2023, 11:14 |
Andreas Koch | XPD | SA3 status | Bunch number control - SA3 FEL
imager
As announced today in the XO meeting |
|
|
100
|
23 Mar 2023, 13:07 |
Naresh Kujala | XPD | Status | Update for elog 99:
Now Gotthard timing is changed
to new setting for 0.5 MHz. |
|
|
133
|
10 Apr 2023, 02:16 |
Jan Gruenert | XPD | SPB_XTD9_IMGPII45 lost steps - REPAIRED | REPAIRED / FIXED
Problem: The imager
SPB_XTD9_IMGPII45 insertion motor lost |
|
|
132
|
10 Apr 2023, 02:25 |
Jan Gruenert | XPD | Issue | REPAIRED / FIXED
Problem: The imager
SPB_XTD9_IMGPII45 insertion motor lost |
|
|
135
|
13 Apr 2023, 15:29 |
Andreas Koch | XPD | Issue | Trigger issue
with SXP_XTD10_IMGES - Exit Slit imager
The external trigger of the Navitar |
|
|
136
|
13 Apr 2023, 15:57 |
Jan Gruenert | XPD | Shift end | End of Diamond Sensor Study
We leave the SASE2 beamline in
the following safe state: |
|
|
227
|
06 Jun 2023, 08:28 |
Naresh Kujala | XPD | Status | SA2 photon beamline
- SRA position were 7 mm x
7 mm, MID reported they see the hallow of |
|
|
262
|
19 Jun 2023, 09:37 |
Jan Gruenert | XPD | Shift start | Rampdown day activities
The main focus is as usual on checking
all tunnel components and to identify any |
|
|
263
|
21 Jun 2023, 15:12 |
Andreas Koch | XPD | New screens installed in FEL imager SA3 | YAG screen
The damaged screen "YAG2"
with Al coating had marks and had been exchanged. |
|
|
387
|
13 Oct 2023, 10:19 |
Theophilos Maltezopoulos | XPD | Issue | An XGM has two single-shot detectors, XGMD
and HAMP.
The XTD2 XGMD amplifiers are damaged, |
|
|
443
|
10 Nov 2023, 17:39 |
Jan Gruenert | XPD | SA2 status | End of 30 keV study
The machine finished their attemps
for 30 keV tuning while using NEPAL injector |
|
|
464
|
28 Nov 2023, 19:36 |
Jan Gruenert | XPD | Status | Ramp down activities completed
by XPD. References:
SASE1
https://in.xfel.eu/elog/SASE1+technical+commissioning/2204
https://in.xfel.eu/elog/SASE1+technical+commissioning/2205
https://in.xfel.eu/elog/SASE1+technical+commissioning/2206
SASE2
https://in.xfel.eu/elog/SASE2+technical+commissioning/1206
...until...
https://in.xfel.eu/elog/SASE2+technical+commissioning/1209
SASE3
https://in.xfel.eu/elog/SASE3+technical+commissioning/2220
https://in.xfel.eu/elog/SASE3+technical+commissioning/2221
The |
|
|
35
|
16 Feb 2023, 14:04 |
Frederik Wolff-Fabris | XO | SA2 status | Data for the Horizontal jitter at the HED
Pop-In was observed during beam delivery
on cw05 (03-05.Feb) and cw07 (14-16.Feb) |
|
|
202
|
12 May 2023, 16:12 |
Frederik Wolff-Fabris | XO | SA3 status | The SA3 EPS power limit at the Big brother
was disabled to allow photon energy scans
in SQS (due to Kr resonance at XGM, invalid |
|
|
237
|
09 Jun 2023, 15:41 |
Raśl Villanueva-Guerrero | VAC | Vacuum Leak in SA2-XTD1 Solid Attenuator - [SOLVED] - Preliminary report | Dear all,
After the incidences reported yesterday
and the diagnostic remotely done (where we |
|