| ID |
Date |
Author |
Group |
Subject |
Text |
 |
|
464
|
28 Nov 2023, 19:36 |
Jan Gruenert | XPD | Status | Ramp down activities completed
by XPD. References:
SASE1
https://in.xfel.eu/elog/SASE1+technical+commissioning/2204
https://in.xfel.eu/elog/SASE1+technical+commissioning/2205
https://in.xfel.eu/elog/SASE1+technical+commissioning/2206
SASE2
https://in.xfel.eu/elog/SASE2+technical+commissioning/1206
...until...
https://in.xfel.eu/elog/SASE2+technical+commissioning/1209
SASE3
https://in.xfel.eu/elog/SASE3+technical+commissioning/2220
https://in.xfel.eu/elog/SASE3+technical+commissioning/2221
The |
|
|
469
|
18 Apr 2024, 23:19 |
Jan Gruenert | PRC | Issue | 22h55:
HED informs that they have issues
with the HED pulse picker in XTD6. It affects |
|
|
97
|
23 Mar 2023, 00:27 |
JP, Hauke, Samuele | HED | Shift summary - night shift | 22 Mar 2023, 23:30 Handover from late shift
Tasks for the night:
source point measurement
Sample |
7x |
|
17
|
05 Feb 2023, 15:18 |
Harald Sinn | PRC | Issue | 15:15 SCS called and reported an
issue with one of the motors of the SCS exit
slit. DOC already looked at the problem and |
|
|
78
|
14 Mar 2023, 10:56 |
Harald Sinn | PRC | Issue | The longitudinal feedback on SA1/3 was
swicthed off by mistake over night. When
it will be switched on, the beam may wiggle |
|
|
79
|
14 Mar 2023, 14:40 |
Harald Sinn | PRC | Issue | In order to optimise the performance of
SASE2 self seeding, a stronger compression
setting is required. |
|
|
80
|
14 Mar 2023, 20:26 |
Harald Sinn | PRC | Issue | SCS could only use two pulses, because
the SXP imager was still in the beam and
SXP shutter open. |
|
|
274
|
25 Jul 2023, 19:18 |
Harald Sinn | PRC | Status | After the 12 hour cryo failure last night,
it was decided to exchange a faulty window
with some reduced transmission at the |
|
|
276
|
28 Jul 2023, 14:46 |
Harald Sinn | PRC | Status | As discussed, there will be a beam interuption
form 14:45 until probably 15:45 related to
jitter studies at A1 that the BKR would like |
|
|
278
|
28 Jul 2023, 15:37 |
Harald Sinn | PRC | Status | Good news: The 'jitter'-tests was
sucessful and BKR could identify the jitter
source related to a wrong software setting |
|
|
279
|
29 Jul 2023, 17:57 |
Harald Sinn | PRC | Issue | The hutch search of SASE3, SXP became defective
around 5am.
DESY MPS group replaced a defective |
|
|
383
|
03 Oct 2023, 22:58 |
Harald Sinn | XRO | Shift end | End of Euler shift: all 3 SASE2 mirrors
are now working with the Euler MDL.
We left the beamline aligned to |
|
|
68
|
03 Mar 2023, 23:25 |
Giuseppe, Sergii | SCS | Late shift summary | achievements:
change the optical laser
to 2 um
found focus of 2 um beam
found |
|
|
282
|
30 Jul 2023, 18:35 |
Giuseppe, Andreas | SCS | Morning Shift summary | achievements:
calibration of exit slits
measurement
of Cu L3 edge
moved hRIXS to nominal |
|
|
229
|
07 Jun 2023, 15:04 |
Giuseppe Mercurio, Teguh Asmara | SCS | Morning shift summary | achievements:
FEL beam realignment because
pointing was off since we had 0 pulses during |
|
|
285
|
02 Aug 2023, 06:44 |
Giuseppe Mercurio, Teguh Asmara | SCS | shift summary | achievements:
beam transport with the
second half of undulators closed
measured |
|
|
286
|
04 Aug 2023, 07:10 |
Giuseppe Mercurio, Teguh Asmara | SCS | night shift summary | achievements:
changed the LEPM to optimize
resolution
found 140 meV
problems: |
|
|
153
|
23 Apr 2023, 23:38 |
Giuseppe Mercurio, Laurent Mercadier | SCS | last late shift UP3463 | Achievements
Beam transport
Coarse
and fine timing
XAS on Co
Aligned |
|
|
277
|
28 Jul 2023, 14:56 |
Giuseppe Mercurio, Laurent Mercadier | SCS | end of shift summary | achievements:
found new M2 bender position
for focusing using blank
tried |
|
|
179
|
05 May 2023, 06:33 |
Giuseppe Mercurio, Diego, Martin, Amina | SCS | Shift summary | achievements:
inserted the magnet and
measured delay scan at the maximum magnetic |
|