SQS Support , posted by Orkidia Bilani on 01 Nov 2023, 11:07 
|
Discussed with T.Mazza on Monday, 30.10.2023, about storing temporarily in XHE1 the wooden boxes of an equipment they recevied recently.
They should be stored until the equipment is tested and working, so that if something goes wrong, it can be shipped to the manufacturer with
the original Verpackung |
|
SPB/SFX Support, posted by Sascha Menzel on 02 Nov 2023, 14:57
|
Einen Chiller von einer Palette mittels Hallenkran gekrant.
Coworkers: O.Bilani, S.Menzel, Th.Dietze |
|
IT Support, posted by Sascha Menzel on 07 Nov 2023, 13:10
|
| Für IT einen Hubwagen für Racks mit dem Gabelstapler in die Balkonebene gehoben. |
|
SPB/SFX Support, posted by Orkidia Bilani on 10 Nov 2023, 11:34
|
With P. Vagovic, SPB/SFX, sorted out components and trash from the hall.
Brought the table and the small box (Pic.1) to their Lab 303.
Discarded the things on the trolley and the black transport box was placed near SEC lab, 400 area (Pic.2). |
|
SXP Support, posted by Sascha Menzel on 10 Nov 2023, 12:25
|
Eine Edelstahlleitung gekürzt und auf Maaß gebogen, diverse Adapter und eine Flexschlauch an die Leitung montiert. Die fertige Leitung angeschlossen
und an das R+K Gestell befestigt. Die Leitung und Adapter kamen von P.Schmidt (TS).
|
|
SPB/SFX Support , posted by Orkidia Bilani on 10 Nov 2023, 14:38
|
Together with P. Vagovic, made ready to transport to XHE1 an optical table (QR 49889) and a detector assembly (QR 49890), and supported on
their XIM entries.
The transport will take place on Monday, 13.11.2023. |
|
SCS Support, posted by Sascha Menzel on 14 Nov 2023, 13:12
|
Eine Aluplatte auf ein Gestell mit Stellmotoren gekrant und verschraubt.
Coworkers: S.Menzel, C.Broers |
|
Transport: Vakuum, posted by Orkidia Bilani on 14 Nov 2023, 17:51
|
Two pipe transport trolleys (QR 44462) were transported from external storage Ütersen to LKW Schleuse from TS colleagues. The third one
will be transported tomorrow.
Trolleys brought to the experiment hall and placed in the Vacuum assembly area. |
|
SXP Support, posted by Orkidia Bilani on 17 Nov 2023, 20:48
|
| SXP support yesterday (M. Izquierdo) and today (V.Vardanyans) with practical things :-) |
|
SPB/SFX Support: Craning, posted by Orkidia Bilani on 20 Nov 2023, 12:22
|
Craned the Julabo chiller up to the rarck room for SPB/SFX.
Co-workers: O. Bilani, M. Peter, Th. Dietze
|
|
SPB/SFX: Craning the Julabo chiller, posted by Orkidia Bilani on 23 Nov 2023, 15:07
|
Supported SPB/SFX with craning down the Julabo Chiller from the rack room.
It will be shipped to the manufacturer for repair.
|
|
SQS Support , posted by Orkidia Bilani on 28 Nov 2023, 19:33
|
Supported SQS with carrying the top small cabinets and placing them on the bigger ones.
Co-workers: O. Bilani, M. Peter, A. Igharas, J. Montano |
|
SQS Support , posted by Orkidia Bilani on 29 Nov 2023, 19:46
|
Brought Back from XHE1 into the Experiment Hall the "PAM - Chambers".
Co-workers: O. Bilani, H. Heuer
|
|
HiBEF Support , posted by Orkidia Bilani on 29 Nov 2023, 19:50
|
"Montagehilfe für Cryofan" brought down from the Laser room of HED/HiBEF to the assembly area of HiBEF.
Mounted partly together and will be transported (next week) back to the external storage in Ütersen.
Co-workers: O. Bilani, S. Arslan, J. Hauser |
|
MID Support , posted by Orkidia Bilani on 29 Nov 2023, 19:57
|
R. Shayduk wanted urgently the vacuum steel cover and didn't really know its location and QR code.
This was stored in our Warehouse in September 2022 (G. Ansaldi, O. Smith and O. Bilani) , QR 37702.
Informed Roman about that, and he will pick it up tomorrow in the Warehouse. |
|
SQS Support, posted by Orkidia Bilani on 01 Dec 2023, 10:25
|
30.11.2023
Supported SQS with grouting in their hutch.
Co-Workers: M. Peter, A. Ihgaras |
|
Next week , posted by Orkidia Bilani on 01 Dec 2023, 10:26
|
Following instruments need XHCrew support next week:
SQS: transport from LKW Schleuse to the hall (Wednesday 9:30) and craning/assembly activities in the hutch (days not known yet)
SCS: Moving with airpads and mounting of a chamber in their hutch (Tuesday - Wednesday) |
|
MID Support, posted by Sascha Menzel on 05 Dec 2023, 13:12
|
Diverse Gewinde mit dem Gewindeschneider nachgeschnitten. 4 Standfüße zusammen gebaut und auf Maaß an montiert.
Coworkers: S.Menzel, G.Ansaldi |
|
LN2 Dewar, posted by Orkidia Bilani on 06 Dec 2023, 11:35
|
Refilled the LN2 dewar # 44229 for H. Han.
|
|
SCS Support, posted by Sascha Menzel on 06 Dec 2023, 19:31
|
Für SCS eine Kammer auf Air cushion mit Druckluft aus der SCS Hutch zur Area transportiert und eine andere Kammer auf dem gleichen Weg
zurück in dei Hutch transportiert.
Coworkers: S.Menzel, C.Broers, J.T.Delitz |