SCS Support, posted by Sascha Menzel on 29 Sep 2022, 16:25 
|
Hall Crew unterstützt beim Reinraumzelt Aufbau auf dem Balkon.
Coworkers: S.Menzel, C,Broers |
|
Joint Cleantent, posted by Orkidia Bilani on 29 Sep 2022, 19:25
|
Mr. Ch. Grüner from "Spetec" came to discuss about the build up of the joint clean tent in the Exp.Hall.
He proposed not to use R+K profiles, but their own, since the R+K profiles do not provide a good stability of the cleanroom modules.
We have most of the filter units, so we do not neccessary need to buy all of them (save money).
The instruments will inform about the last filter change (actually is a yearly procedure).
The crane position for the SCS part of the clean tent can be changed (we got confirmation from J-T.Delitz).
In case it will be granted to build the cleantent from "Spetec", we agreed to have only one expert from "Spetec" to build it up, instead of four (saving money), since the entire XHCrew (O.Bilani, S.Menzel, M.Lüdeke) will work on it.
The time scale is 2-3 weeks to complete the whole mounting and the Inbetriebnahme.
On 30.09 we will go to XHE1 to see the type of the filter units and give this information further to Mr. Ch.Grüner. |
|
XHE1, posted by Orkidia Bilani on 30 Sep 2022, 10:40
|
XHCrew went to shaft building and took note of the series numbers of the filter units. There are still 8 pieces left and their functionality is somehow unclear.
Checked the spaces for the next week's transport.
Coworkers: S.Menzel, M.Lüdeke, O.Bilani
|
|
SCS: Transport to XHE1, posted by Orkidia Bilani on 30 Sep 2022, 10:47
|
SCS have few components to store in XHE1:
QR 44263 (SCS Test Chamber) which was placed by XHCrew inside a wooden box from SCS.
QR 49608 (fast CCD motorized 4DOF-37394) and QR 49609 (Support for mot 5 DOF Detector-37400).
A big Gestell Traverse (QR 49620) in the SCS Hutch craned onto pallets and brought into the LKW Schleuse (pic.3).
This transport will take place on 5.10.2022
Coworkers: S.Menzel, O.Bilani
|
|
HiBEF: Sorting out, posted by Orkidia Bilani on 30 Sep 2022, 10:52
|
HiBEF will start next week sorting out the four Gitterboxes and other things located around/infront of MID hutch:
- J.Hauser will sort out what is waste and what can be stored (long and/or short term storage)
- XHCrew offered support to speed up the action.
Coworkers: J. Hauser, O. Bilani |
|
Zylinder tausch Mobiler Kran, posted by Sascha Menzel on 30 Sep 2022, 11:33
|
Hall Crew hat den Hubzylinder vom mobilen Kran durch einen neuen Zylinder ersetzt.
Der Ersatzzylinder wurde von J.Hauser zur Verfügung gestellt (er hatte einen Ersatzteil bestellt).
Coworkers: M.Lüdeke, S.Menzel |
|
TS Support, posted by Sascha Menzel on 30 Sep 2022, 11:43
|
P.Schmidt bat um unterstützung, 1 Dewar mit flüssigen Stickstoff für H.Huijong gefüllt.
Coworkers: S.Menzel |
|
SPB/SFX Support, posted by Sascha Menzel on 30 Sep 2022, 14:29
|
N.Reimers bat die XH Crew um unterstützung, Im Gasschrank wurde eine Stickstoffflasche durch eine Heliumflasche ersetzt. P.Schmidt gab die Heliumflasche heraus und Stickstoffflasche wurde im Gaslager eingelagert.
Coworkers: N.Reimers, P.Schmidt, S.Menzel |
|
SA1: Luftbefeuchter, posted by Orkidia Bilani on 04 Oct 2022, 08:51
|
Der Luftbefeuchter auf dem Balkon (SA1) hat (akustisches) Alarm gezeigt (seit mind. gestern) .
Die Hebeanlage war kapputt. TS informiert und das Problem behoben/die Hebeanlage wieder repariert. |
|
SXP Support, posted by Sascha Menzel on 04 Oct 2022, 12:23
|
XHCrew hat diverse Komponenten an das Momentum Mikroskop Gestell montiert.
Coworkers: M.Lüdeke, S.Menzel |
|
SQS Support, posted by Sascha Menzel on 04 Oct 2022, 12:30
|
XHCrew hat an das Reinraumzelt in der SQS Hutch eine Lochwand montiert.
Coworkers: M.Lüdeke, S.Menzel |
|
R+K Regal fuer SQS fertiggestellt, posted by Sascha Menzel on 04 Oct 2022, 12:34
|
Die letzte Aluplatte an das R+K Regal für SQS montiert und somit fertiggestellt.
Coworkers: M.Lüdeke, S.Menzel |
|
Transport to XHE1: Preparation, posted by Orkidia Bilani on 04 Oct 2022, 13:15
|
We prepared and brought the components, which will be transported to XHE1, into the LKW-Schleuse.
The transport will be carried out tomorrow, 05.10.2022, very early in the morning.
Coworkers: O.Bilani, S. Menzel, M. Lüdeke |
|
Manual red Crane, posted by Orkidia Bilani on 04 Oct 2022, 14:29
|
The manual red crane (from HiBEF) was tested and it WORKS!
Nevertheless an external specialist will take care for the Inbetriebnahme/Zulassung very soon (S.Arslan will contact him).
Instruments (FXE, HiBEF, HED) happy about it |
|
SCS Support, posted by Sascha Menzel on 04 Oct 2022, 15:39
|
Einen Metallschrank auf den Balkon von SCS transportiert, S.Arslan half mit dem Gabelstapler den Schrank auf die Brüstung zu heben.
Coworkers: S.Arslan, M.Lüdeke, S.Menzel |
|
SCS Support, posted by Sascha Menzel on 04 Oct 2022, 15:44
|
Das Reinraumzelt auf dem Balkon aufgestellt und Profile montiert.
Coworkers: C.Broers, M.Lüdeke, S.Menzel |
|
Transport to XHE1: postponed for tomorrow, posted by Orkidia Bilani on 05 Oct 2022, 10:45
|
Unfortunately it did not succeed, because the elevator in XHE1 is out of service.
Technische Notdienst was there, but could not solve the problem. A technician from "Lutz Aufzüge" will look it up tomorrow.
The Anhänger with the components is in XHE1, the transporter is loaded and ready for the transport tomorrow.
Coworkers: O. Bilani, S. Menzel, M.Lüdeke, and the care takers frrom TS.
|
|
SQS Laserboard Regal 2, posted by Michael Luedeke on 06 Oct 2022, 08:21
|
5.10.2022 ---> Rose Krieger Profile gesägt und montiert |
|
SQS Hutch Kühlwasser, posted by Michael Luedeke on 06 Oct 2022, 08:23
|
29.9.22 ---> SQS Kühlwasser an einer Vacuumpumpe installiert |
|
SQS Hutch 19" Gerät montiert, posted by Michael Luedeke on 06 Oct 2022, 08:25
|
28.09.22 ---> 19" Gerät montiert, dazu Rose Krieger Winkel angepasst |