Removed from the experiment hall all the empty cardboard boxes scattered around.

Sorted out various screws in boxes and cabinets.

Wrote down the list of content for the blue cabinet.

Sorting out to be continued :-)

Went with Yevheniy and Sergei to XHE1. They dismount and took some controllers and cables from the COMO setup.

Sorted out various screws in boxes and cabinets.

To be continued...

Again sorted out various screws in boxes and cabinets.

William helped as well.

Sorting out to be continued :-)

Only a few screws are left over to sort out.

Next steps would than be: nuts, waschers, Gewindestifte and vacuum parts.

:-)

Supported SCS in dismounting and craning a chamber and its support plates in the SCS experiment hutch.

Coworkers: O.Bilani, W. Aplin, J-T. Delitz

► The warning acoustic signal was activated (the Klimaanlage, X.TL_XHEXP1_D02 at the end of SA1, roof). Muted it, not a problem, still TS informed since O. Engelmann was onsite (see pic).

► FXE: For Monday, 15.05, the dewars # 25581 and # 25085 to be refilled. Contact M.Knoll or P. Frankenberger for the time to pick it up (since they do not have Zugang to the LKW Schleuse). They will need only one, ask which exactly they need.

► Brought the Wasserbehälter and a a pallet with Kabeln into the LKW Schleuse, which were at XTD8 and belonged to TS (see pic).

► Removed from the hall and disposed a useless pallet which was located in front of the Pulserraum (see pic).

► Thomas Baumann gave me a box with consumables/screws (see pic).

► Sorted out almost all the "Gewindestifte" and labeled them.

► Sorted out a lot of nuts and washers (Sascha please name them, I don't know their names :-)) see pic.

► SQS: The chiller at SQS is running very hot, currently at 21:35 is by 36.3°C. A ventilator is nonstop trying to "cool down". No one from SQS now present (see pics 1 and 2)

► SCS: L.Adriano wants to bring a  Werkzeugschrank and a Rollwagen (inkl. the box with liquid gases and accessories/supplies) into the shaft building. Transport on Tuesday at around 13:00. He also mentioned that he has 1-2 cabinets, to give us, but needs to check first where they are

            (see pic 3)

► MID: They will dismount the clean tent located near their hutch (close to the yellow beam pipes). Sascha will support with craning on 24.05.2023 at ca. 13:00. Also they will remove/dispose non usable things from the hall. (see pics 4 and 5)

► ITDM: The waste of the IBM computers u.ä. was disposed.

► Consumables: The grey box is completely finished, :-) . Sascha please name them (I placed already the yellow sticky note to the drawer nr.4). Sorting out is almost at the end.

► SPB/SFX:  gave to XHCrew (more or less sorted out) various screws and Gewindestifte (pic. 1). Sorted them out in boxes and placed in the cabinet (pic.2, pic.3).

► SQS:        I gave back the Rollwagen (placed it by the door near the control hutch).

► SCS:        Needs our support by next week. The plan "when will happen what and who is needed when" will be sent soon by Jan Torben.

► TS:          The elevator near the LKW Schleuse seemed to have some real troubles. A Redmine Ticket already sent to TS bzw. Süleyman.

The S. Arslan answer of the Redmine Ticket  concerning the elevator (see pic below). And today the elevator was again out of order, see the previous entry frpm S. Menzel.

The elevator in TH2 is again <Out of Order>.  The door doesn't close and it got stuck in U3.

S.Arslan (in cc.L.Kersting) were informed via email.

Still called S.Arslan to notify the staff via email, as well as to talk to the "Lutzaufzüge" technicians. Süleyman called back, a technician from "Lutz" will possibly come (until now not yet here).

► In the consumables' storage found this box with various M3 screws.

► No idea from whom, anyway a "thank you" for the anonymous donator :-)

► @SASE1  an mehreren Weiss Klimatechnik : die Verkleidung der Rohre löst sich (siehe Bilder)

► Redmine Ticket sent to D. Tscherwitschka and A. Kondraschew

► The elevator is functional again.

► Talked to the technician from "Lutzaufzüge" and he said that he fixed the bug caused by "short waiting times" during transportations. He set a longer time now.

All the parts/components of the instruments, which had to be stored in the external storage in Ütersen, have been transported and labeled there.

Coworkers: O.Bilani, L.Kersting, M. Pooch, H. Heuer.

- Supported HED with N2 and He dewars.

- Very quiet in the hall, and after 12:00 almost nobody around, machine is down.

Transport of two granite blocks (QR 51494 and QR 514945) of SQS from XHEXP1 to XHE1.

Coworkers: S. Menzel, M. Peter, O. Bilani

Brought back from XHE1 to the experiment hall following parts for SQS:

Coworkers: S. Menzel, O. Bilani