Transport of two granite blocks (QR 51494 and QR 514945) of SQS from XHEXP1 to XHE1.

Coworkers: S. Menzel, M. Peter, O. Bilani

Brought back from XHE1 to the experiment hall following parts for SQS:

Coworkers: S. Menzel, O. Bilani

SQS doesn't have many space left in their assembly area. Talked/dealed with the SQS colleagues, and managed to free spaces :-).

The parts/components will be transported to XHE1 and to Ütersen.

Sascha will do the transport to XHE1 on his shift over the weekend. The transport to Ütersen will be done next week.

Coworkers: O.Bilani, N. Rennhack, J. Montano, A. Igharas, S. Menzel, S. Dold

Kai-Erik Ballak gave for XHCrew consumables storage 5 blue cabinets :-).

Transport of SQS components:

QR 44455, QR 44458 and QR 49874 from XHEXP1 to XHE1.

QR 45466 from XHE1 back to XHEXP1.

Coworkers: O. Bilani, M. Peter, H. Heuer

M. Petrich called in the morning saying that MID needed two more dewars than originally planned.

A. Zouzoulya did write and called that he didn't have access to the LKW Schleuse. So I came as well to support on that and to show him the dewars in the cage, since there were other filled (ohne Schlauch).

When I arrived Sascha was alreaday here and he did fill the two dewars with transferschlauch (#25578 & #25087)  for MID.

D. Lomidze and M. Turcato informed that they found the position/place where the silicon oil leakage was coming from. They are on he way to fix the problem.

Talked with P. Vagovic to remove from the experiment hall his setup and a table.

He will write a ticket this week, so that we can tranport it to XHE1 or in Ütersen.

SPB/SFX got a new chiller, which was then craned into the rack room. 

The borrowed chiller (the one they borrowed from SCS) was craned out of the rack room.

Coworkers: O.Bilani, S.Menzel, M. Peter, M. Sikorski, T. Dietze

In the truck bay, the rain water flows underneath  the Rolltor, and it goes directly under the Elektroschrank, where there are cables going down in the Kabelkanal. Put a tissue and a sponge als Dämmung.

On Monday Süleyman will be contacted. 

In SASE3 one of pipelines of the WeissKlima Technik, are very hot in certain positions. Checked the other pipes of different WeissKlimaTechnik, they do not show any temperature increase (would say similar to the hall temperature).

TS will be informed!

-> Dicsarded empty boxes from the hall.

-> Sorted out a box with screws and washers which was given from instruments to the HallCrew.

Craned for SCS a component which belonged to Desy users/colleagues.

This will then be transported from SCS back to Desy.

Coworkers: O.Bilani, M.Peter, J.Shima

Supported SCS with craning of a shikane.

Co-workers: O.Bilani, JT.Delitz

Discussed with T.Mazza on Monday, 30.10.2023, about storing temporarily in XHE1 the wooden boxes of an equipment they recevied recently. 

They should be stored until the equipment is tested and working, so that if something goes wrong, it can be shipped to the manufacturer with the original Verpackung 

If all fine, they will be disposed, most probably by the end of winter maintenance period.

Transport was done!

Co-workers: S.Menzel. O.Bilani, J. Montano

With P. Vagovic, SPB/SFX, sorted out components and trash from the hall.

Brought the table and the small box (Pic.1) to their Lab 303.

Discarded the things on the trolley and the black transport box was placed near SEC lab, 400 area (Pic.2).

Together with P. Vagovic, made ready to transport to XHE1 an optical table (QR 49889)  and a detector assembly (QR 49890), and  supported on their XIM entries.

The transport will take place on Monday, 13.11.2023.

Two pipe transport trolleys  (QR 44462) were transported from external storage Ütersen to LKW Schleuse from TS colleagues. The third one will be transported tomorrow.

Trolleys brought to the experiment hall and placed in the Vacuum assembly area. 

SXP support yesterday (M. Izquierdo) and today (V.Vardanyans) with practical things :-)