2x Dewar für Vacuum befüllt 1x Groß und 1x Klein

Coworkers: B.Wolf, D.Jaacks

Einen kleinen Dewar vom XHE2 zum Außengitter transportiert.

Dewar#25579 für J.Moore gefüllt.

Das Reinraumzelt mit den Leuten von Desy zerlegt, damit es später abtransportiert werden kann.

Coworkers: B. Wolf, K. Pfeiffer

► SQS: The chiller at SQS is running very hot, currently at 21:35 is by 36.3°C. A ventilator is nonstop trying to "cool down". No one from SQS now present (see pics 1 and 2)

► SCS: L.Adriano wants to bring a  Werkzeugschrank and a Rollwagen (inkl. the box with liquid gases and accessories/supplies) into the shaft building. Transport on Tuesday at around 13:00. He also mentioned that he has 1-2 cabinets, to give us, but needs to check first where they are

            (see pic 3)

► MID: They will dismount the clean tent located near their hutch (close to the yellow beam pipes). Sascha will support with craning on 24.05.2023 at ca. 13:00. Also they will remove/dispose non usable things from the hall. (see pics 4 and 5)

► ITDM: The waste of the IBM computers u.ä. was disposed.

► Consumables: The grey box is completely finished, :-) . Sascha please name them (I placed already the yellow sticky note to the drawer nr.4). Sorting out is almost at the end.

The damages of the concrete floor in SCS area and SASE3 in general, as well as the damages in SASE2 under the truck bay were discussed with K. Löptien.

The repair from the care takers will start very soon.

Amgad Nasr bat um Support beim kranen von drei Holzboxen in der Technikzentrale 3.

Coworkers: K.Pfeiffer, S.Menzel

Den Detektor DSSC2 auf das Supportgestell gekrant und befestigt.

Coworkers: A.Reich, DET Gruppe, K.Pfeiffer, S.Menzel

V. Vardanyan asked for the XHCrew support in craning in the SXP experiment hutch. Will meet him on 15.12 for further details.

The four pallets with consumables, which O.Smith gave, have been all placed ordered in the cabinets of XHCrew consumables' storage.

Brought the empty pallets and boxes back to the warehouse.

Only a few screws are left over to sort out.

Next steps would than be: nuts, waschers, Gewindestifte and vacuum parts.

:-)

Sorted the screws, nuts, studs and washers that were donated to us into the Screwcabinet aswell as the Special Wishes Cabinet.

Sorted out various screws in boxes and cabinets.

Wrote down the list of content for the blue cabinet.

Sorting out to be continued :-)

Sorted out various screws in boxes and cabinets.

To be continued...

Sorted out a box with screws, nuts, u.Ä., which was donated from SXP.

Arranged the reserve consumables (located in their respective cabinets). Now they are  well arranged and labelled (bis M8x45). The rest to be continued... 

-> Placed in the cabinets the delivered screws and studs:

M8x65 A4: Sechskantschraube mit Schaft

M8x70 A4: a) Zylinderschrauben m. Innensechskant mit Schaft; b) Sechskantschrauben m. Schaft; c) Sechskantschrauben, Gewinde bis Kopf.

M8x16 A4: Gewindestift

M6x60 A4: Gewindestift

M6x55 A4: Gewindestift

M3x16: Gewindestift

M2,5x8: Gewindestift

M2,5x6: Gewindestift

M2,5x4: Gewindestift

M2x4: Gewindestift

-> The rest/leftover amount placed to the Reserve Cabinets Nr.1 and Nr.2.

-> Brought in order the chaos in the Reserve Cabinets Nr.1 and Nr.2.

-> Inconsistancies in the other three cabinets will be straightened up on monday.

Again sorted out various screws in boxes and cabinets.

William helped as well.

Sorting out to be continued :-)

Einen Chiller aus den Rackraum von SPB zusammen mit TS von den Leitungen gelöst und das Silikonöl abgelassen. Anschließend den Chiller vom Podest mit den Hallenkran runtergekrant. 

Coworkers: D.Tscherwitschka, A.Kondraschew, N.Reimers, S.Menzel

Einen von SCS geliehenden Chiller für den Rackraum von SPB auf die Empore gekrant.

Coworkers. D.Tscherwitschka, A.Kondraschew, N.Reimers, O.Bilani, S.Menzel