Transport to XHE1: postponed for tomorrow, posted by Orkidia Bilani on 05 Oct 2022, 10:45
|
Unfortunately it did not succeed, because the elevator in XHE1 is out of service.
Technische Notdienst was there, but could not solve the problem. A technician from "Lutz Aufzüge" will look it up tomorrow.
The Anhänger with the components is in XHE1, the transporter is loaded and ready for the transport tomorrow.
Coworkers: O. Bilani, S. Menzel, M.Lüdeke, and the care takers frrom TS.
|
SCS Support, posted by Sascha Menzel on 04 Oct 2022, 15:44 
|
Das Reinraumzelt auf dem Balkon aufgestellt und Profile montiert.
Coworkers: C.Broers, M.Lüdeke, S.Menzel |
|
SCS Support, posted by Sascha Menzel on 04 Oct 2022, 15:39
|
Einen Metallschrank auf den Balkon von SCS transportiert, S.Arslan half mit dem Gabelstapler den Schrank auf die Brüstung zu heben.
Coworkers: S.Arslan, M.Lüdeke, S.Menzel |
|
Manual red Crane, posted by Orkidia Bilani on 04 Oct 2022, 14:29
|
The manual red crane (from HiBEF) was tested and it WORKS!
Nevertheless an external specialist will take care for the Inbetriebnahme/Zulassung very soon (S.Arslan will contact him).
Instruments (FXE, HiBEF, HED) happy about it |
|
Transport to XHE1: Preparation, posted by Orkidia Bilani on 04 Oct 2022, 13:15
|
We prepared and brought the components, which will be transported to XHE1, into the LKW-Schleuse.
The transport will be carried out tomorrow, 05.10.2022, very early in the morning.
Coworkers: O.Bilani, S. Menzel, M. Lüdeke |
|
R+K Regal fuer SQS fertiggestellt, posted by Sascha Menzel on 04 Oct 2022, 12:34
|
Die letzte Aluplatte an das R+K Regal für SQS montiert und somit fertiggestellt.
Coworkers: M.Lüdeke, S.Menzel |
|
SQS Support, posted by Sascha Menzel on 04 Oct 2022, 12:30
|
XHCrew hat an das Reinraumzelt in der SQS Hutch eine Lochwand montiert.
Coworkers: M.Lüdeke, S.Menzel |
|
SXP Support, posted by Sascha Menzel on 04 Oct 2022, 12:23
|
XHCrew hat diverse Komponenten an das Momentum Mikroskop Gestell montiert.
Coworkers: M.Lüdeke, S.Menzel |
|
SA1: Luftbefeuchter, posted by Orkidia Bilani on 04 Oct 2022, 08:51
|
Der Luftbefeuchter auf dem Balkon (SA1) hat (akustisches) Alarm gezeigt (seit mind. gestern) .
Die Hebeanlage war kapputt. TS informiert und das Problem behoben/die Hebeanlage wieder repariert. |
|
SPB/SFX Support, posted by Sascha Menzel on 30 Sep 2022, 14:29
|
N.Reimers bat die XH Crew um unterstützung, Im Gasschrank wurde eine Stickstoffflasche durch eine Heliumflasche ersetzt. P.Schmidt gab die Heliumflasche heraus und Stickstoffflasche wurde im Gaslager eingelagert.
Coworkers: N.Reimers, P.Schmidt, S.Menzel |
|
TS Support, posted by Sascha Menzel on 30 Sep 2022, 11:43
|
P.Schmidt bat um unterstützung, 1 Dewar mit flüssigen Stickstoff für H.Huijong gefüllt.
Coworkers: S.Menzel |
|
Zylinder tausch Mobiler Kran, posted by Sascha Menzel on 30 Sep 2022, 11:33
|
Hall Crew hat den Hubzylinder vom mobilen Kran durch einen neuen Zylinder ersetzt.
Der Ersatzzylinder wurde von J.Hauser zur Verfügung gestellt (er hatte einen Ersatzteil bestellt).
Coworkers: M.Lüdeke, S.Menzel |
|
HiBEF: Sorting out, posted by Orkidia Bilani on 30 Sep 2022, 10:52
|
HiBEF will start next week sorting out the four Gitterboxes and other things located around/infront of MID hutch:
- J.Hauser will sort out what is waste and what can be stored (long and/or short term storage)
- XHCrew offered support to speed up the action.
Coworkers: J. Hauser, O. Bilani |
|
SCS: Transport to XHE1, posted by Orkidia Bilani on 30 Sep 2022, 10:47
|
SCS have few components to store in XHE1:
QR 44263 (SCS Test Chamber) which was placed by XHCrew inside a wooden box from SCS.
QR 49608 (fast CCD motorized 4DOF-37394) and QR 49609 (Support for mot 5 DOF Detector-37400).
A big Gestell Traverse (QR 49620) in the SCS Hutch craned onto pallets and brought into the LKW Schleuse (pic.3).
This transport will take place on 5.10.2022
Coworkers: S.Menzel, O.Bilani
|
|
XHE1, posted by Orkidia Bilani on 30 Sep 2022, 10:40
|
XHCrew went to shaft building and took note of the series numbers of the filter units. There are still 8 pieces left and their functionality is somehow unclear.
Checked the spaces for the next week's transport.
Coworkers: S.Menzel, M.Lüdeke, O.Bilani
|
|
Joint Cleantent, posted by Orkidia Bilani on 29 Sep 2022, 19:25
|
Mr. Ch. Grüner from "Spetec" came to discuss about the build up of the joint clean tent in the Exp.Hall.
He proposed not to use R+K profiles, but their own, since the R+K profiles do not provide a good stability of the cleanroom modules.
We have most of the filter units, so we do not neccessary need to buy all of them (save money).
The instruments will inform about the last filter change (actually is a yearly procedure).
The crane position for the SCS part of the clean tent can be changed (we got confirmation from J-T.Delitz).
In case it will be granted to build the cleantent from "Spetec", we agreed to have only one expert from "Spetec" to build it up, instead of four (saving money), since the entire XHCrew (O.Bilani, S.Menzel, M.Lüdeke) will work on it.
The time scale is 2-3 weeks to complete the whole mounting and the Inbetriebnahme.
On 30.09 we will go to XHE1 to see the type of the filter units and give this information further to Mr. Ch.Grüner. |
|
SCS Support, posted by Sascha Menzel on 29 Sep 2022, 16:25
|
Hall Crew unterstützt beim Reinraumzelt Aufbau auf dem Balkon.
Coworkers: S.Menzel, C,Broers |
|
Elevator at TH2, posted by Orkidia Bilani on 29 Sep 2022, 15:52
|
Nils Rennhack called because the elevator at TH2 has stopped between the floors.
L. Kersting was immediately informed, and he is taking care to solve the problem.
|
|
TS Support, posted by Sascha Menzel on 29 Sep 2022, 12:10
|
P. Schmidt bat um unterstützung beim Dewars füllen mit flüssigen Stickstoff. 2 Dewars für Vacuum gefüllt.
Coworkers: S.Menzel |
|
Hall Organization Meeting, posted by Orkidia Bilani on 29 Sep 2022, 10:39
|
-> FXE: mentioned, as two days ago, that they will need support on 10.10 for craning of the Kappa Goniometer: Hall Crew will try to find the best solution for that and organize a meeting between FXE, HallCrew and S. Arslan.
They asked if we know when can they have He again, but we made it clear that XHCrwe doesn't have any news about that and we are not the point of contact for gases.
-> SXP: support on finishing the building up of the Frame for the Momentum Microscope (Tuesday 4.10.2022). V. Vardanyan was aksed to start mounting early in the morning and HallCrew will join for support at 10:00 am.
needs support on craning a pump (details on what and when exactly will follow).
-> PLA: must/have to drill few holes for the central pressurized air into the pillars (Säule) in the exp.hall. Since they must drill only on mondays (when there is no beam and the measurements do not get disturbed from vibrations) and 3.10 is a holyday, they asked for permission to drill on Tuesday (4.10), but not the entire day.
FXE. HED, SQS and SCS do not see a problem on that. Other Instruments still to be asked.
-> The instruments' representative were informed that from 10.10 - 15.10 only M. Lüdeke is present from XHCrew and the week after, 17.10 - 21.10 no member of XHCrew is there due to vacation/training. O.Bilani will check anyway regularly the emails and will be telefonisch erreichbar in any case and reminded the colleagues to keep the hall free from any chaos, danger and waste.
|