SCS Support, posted by Kai-Erik Pfeiffer on 21 Nov 2024, 14:25 
|
Prepared the back of the heat exchanger with a 40mm layer of insulation as requested by SCS. The rest will be finished tomorrow because i don't have
access to the workshop. |
|
VAC Support, posted by Kai-Erik Pfeiffer on 22 Nov 2024, 15:06
|
| Filled two LN2 Dewars for VAC. |
|
MID Support, posted by Kai-Erik Pfeiffer on 25 Nov 2024, 11:24
|
| Built a transfer trolley for MID. |
|
SEC Support, posted by Kai-Erik Pfeiffer on 28 Nov 2024, 07:32
|
*Nachtrag 27.11.24
Filled LN2 Dewar 25584 for SEC. |
|
SCS Support, posted by Kai-Erik Pfeiffer on 28 Nov 2024, 08:22
|
Supported SCS with moving a Chamber with airpads under the clean tent to make space for another Chamber.
Coworkers: J. T. Delitz, S. Menzel, K. Pfeiffer |
|
SEC Support, posted by Kai-Erik Pfeiffer on 28 Nov 2024, 10:55
|
| Filled LN2 Dewar #25085 for SEC. |
|
SXP Support, posted by Kai-Erik Pfeiffer on 29 Nov 2024, 14:52
|
Supported with moving the heavy screw cabinet of SXP under the stairs in front of their hutch.
Coworkers: V. Vardanyan, K. Pfeffer |
|
SEC Support, posted by Kai-Erik Pfeiffer on 02 Dec 2024, 08:45
|
| Filled LN2 Dewar #25085 for SEC. |
|
SCS Support, posted by Kai-Erik Pfeiffer on 02 Dec 2024, 12:52
|
Brought the Dewar scale to the truck bay and weighed a Helium Dewar. Then brought the scale back to the SCS storage area.
Coworkers: J. T. Delitz, P. Schönborn, K. Pfeiffer |
|
Transport to XHE1, posted by Kai-Erik Pfeiffer on 10 Dec 2024, 09:02
|
Die Goniometer Wiege von HED-HIBEF nach XHE1 transportiert und eingelagert. Gitterbox und Kiste mit QR 44205 und 52462 aus XHE1 abgeholt und in die Halle
transportiert.
|
|
Transport to Uetersen, posted by Kai-Erik Pfeiffer on 12 Dec 2024, 12:26
|
Brought QR 62453, 62458 and 62457 to Uetersen.
Coworkers: O. Bilani, B. Wolf, K. Pfeiffer |
|
Halter für Gewichtplatten, posted by Kai-Erik Pfeiffer on 17 Dec 2024, 13:00
|
Halter angefertigt, damit die Gewichtplatten sich nicht mehr bewegen und keine Finger mehr einquetschen können. Dazu Winkel bearbeitet und zusätzlich
mit Armaflex an das Gestell angebracht.
|
|
Transport to XHE1, posted by Kai-Erik Pfeiffer on 18 Dec 2024, 14:14
|
Transported a Chiller (QR49891), a Rack (QR5802) and the metal Box (QR52462) to XHE1.
Coworkers: B. Wolf, K. Pfeiffer |
|
SXP Support, posted by Kai-Erik Pfeiffer on 07 Jan 2025, 11:11
|
Drei Hilti Profile in der SXP Hutch angebracht um daran neue Kabelhalter zu montieren.
Coworkers: B. Wolf, K. Pfeiffer |
|
FXE Support, posted by Kai-Erik Pfeiffer on 07 Jan 2025, 14:05
|
Craned a Chiller for FXE on top of their Hutch.
Coworkers: B. Wolf, K. Pfeiffer |
|
MID Support, posted by Kai-Erik Pfeiffer on 08 Jan 2025, 09:41
|
Supported with craning the Girder from MID down from the truck bay to the hall and moving it in front of the MID hutch.
Coworkers: B. Wolf, S. Arslan, P. Schönborn, K. Pfeiffer |
|
SQS Support, posted by Kai-Erik Pfeiffer on 10 Jan 2025, 10:26
|
Supported with craning a Turbopump onto a Chamber for SQS.
Coworkers: B. Wolf, A. Igharas, K. Pfeiffer |
|
Profile zurechtschneiden, posted by Kai-Erik Pfeiffer on 13 Jan 2025, 14:20
|
Rose und Krieger Profile zurechtgeschnitten für ein zukünftiges Projekt von SCS.
Coworkers: B.Wolf, K. Pfeiffer |
|
Konsolenhalter, posted by Kai-Erik Pfeiffer on 14 Jan 2025, 11:40
|
Ein Gestell für eine Konsole in der Hutch von MID gebaut und aufgestellt.
Coworkers: B. Wolf, P. Schönborn, K. Pfeiffer |
|
Kabelhalter, posted by Kai-Erik Pfeiffer on 15 Jan 2025, 08:45
|
| Zwei Kabelhalter mit einem Hilti Profil und zwei Winkeln in der SXP Hutch angebracht. |