SXP Support, posted by Benjamin Wolf on 21 May 2025, 10:06  
 | 
Einen Halter für die LN 2 Transferleitungen gebaut und montiert. Anschließend die Leitungen daran aufgehängt und fixiert.
 
 
 
 
 
  | 
 
 
SXP Support, posted by Benjamin Wolf on 22 May 2025, 13:10 
 | 
R und K Profile zugeschnitten, Material zusammen gestellt und die Teile vormontiert zur Optimierung des Halters für die Transferleitungen.
 
 
 
 
 
Coworker: S.Menzel, B.Wolf | 
 
 
SXP Support, posted by Kai-Erik Pfeiffer on 22 May 2025, 19:29  
 | 
| Die vorbereiteten Teile in der SXP Hutch montiert. | 
 
 
SXP Support, posted by Sascha Menzel on 28 May 2025, 12:02  
 | 
| Die vom J.Moore bestellten Halter an den LN2 Halterahmen montiert. | 
 
 
SXP Support, posted by Sascha Menzel on 08 Jul 2025, 09:26      
 | 
Einen Laser-Tisch in der SXP Exp.Hutch auf Schwerlastrollen mit zwei Hochhubwagen gestellt, zwei R+K Profile vom Reinraum demontiert und alles mit den 
mobilen Kran gesichert. Den Laser-Tisch an die neue Position verschoben und abgestellt.
 
 
Coworkers: K.Pfeiffer, D.Jaacks, B.Wolf, S.Menzel | 
 
 
SXP Support, posted by Kai-Erik Pfeiffer on 29 Jul 2025, 14:19   
 | 
An zehn Edelstahlrahmen mit Netzen Löcher gebohrt, je vier Halter mit Griffen montiert und auf die Lasertische in der SXP Hutch gelegt.
 
 
 
 
 
Coworkers: | 
 
 
SXP Support, posted by Sascha Menzel on 09 Sep 2025, 17:05     
 | 
Löcher gebohrt und Griffhalter an zwei Laserbord-Deckel angebracht und jeweils zwei Senklöcher an eine von 8 Gleitschienen gebohrt.
 
 
Coworkers: K.Pfeiffer, B.Wolf, D.Jaacks und S.Menzel | 
 
 
SXP Support, posted by Kai-Erik Pfeiffer on 13 Oct 2025, 14:43  
 | 
| Sechs Führungsschienen an einen Lasertisch in der SXP Hutch montiert. Diese wurden in der Vergangenheit vorbereitet. | 
 
 
SXP Monitorhalter, posted by Kai-Erik Pfeiffer on 07 Jul 2025, 13:18   
 | 
Die andere Seite im SXP Kontrollraum mit Hiltischiene, neuen Monitoren und Haltern aufgerüstet.
 
 
 
 
 
Coworkers: | 
 
 
SXP Area aufgeräumt, posted by Sascha Menzel on 04 Jul 2023, 14:46  
 | 
Die Bodenbeläge ( Pappe & Filz ) aus der SXP Area sowie vom Podest aufgenommen und entsorgt.
 
 
Coworkers: O.Bilani, S.Menzel | 
 
 
SQS: Transport to XHEXP1, posted by Orkidia Bilani on 22 Sep 2023, 10:45 
 | 
Brought back from XHE1 to the experiment hall following parts for SQS:
 
 
QR48494 Rack
 
 
QR48493 Rack
 
 
QR47932 Kabel
 
 
QR47938 Kabel
 
 
 
 
Coworkers: S. Menzel, O. Bilani | 
 
 
SQS: Transport to XHE1, posted by Orkidia Bilani on 27 Sep 2022, 17:32 
 | 
SQS asks for support to transport from Experimental Hall to XHE1 the following components:
 
 
-> Cluster source  with QR44455 | 
 
 
SQS: Transport to XHE1, posted by Orkidia Bilani on 21 Sep 2023, 08:40  
 | 
Transport of two granite blocks (QR 51494 and QR 514945) of SQS from XHEXP1 to XHE1.
 
 
 
 
 
Coworkers: S. Menzel, M. Peter, O. Bilani | 
 
 
SQS: Transport from XHE1 to XHEXP1, posted by Orkidia Bilani on 11 Nov 2022, 15:19 
 | 
Y. Ovcharenko wrote a Redmine Ticket to XO Transport:
 
 
The DSSC components: QR 47932,  QR 47938, QR48494 should be brought back to XHEXP1. Already booked the transporter for Thursday 17.11.2022. | 
 
 
SQS: Transport, posted by Orkidia Bilani on 29 Sep 2023, 12:34 
 | 
Transport of SQS components:
 
 
QR 44455, QR 44458 and QR 49874 from XHEXP1 to XHE1.
 
 
QR 45466 from XHE1 back to XHEXP1. | 
 
 
SQS: Support, posted by Orkidia Bilani on 28 Sep 2022, 13:44 
 | 
Yevheniy sent a ticket to XO Transport, as following:
 
 
 
 
 
"Hi   Hall Crew,  | 
 
 
SQS: Emergency craning , posted by Orkidia Bilani on 22 Mar 2024, 13:47  
 | 
Craned for SQS the chain of the manual crane. 
 
 
This because the REMI needed to be repaired. 
 
 
The core of REMI was craned manually by Rebekka, Ares and Sergey. | 
 
 
SQS: "Igel" Kammer, posted by Orkidia Bilani on 15 Nov 2022, 12:58 
 | 
M. Ilchen (with Desy Transport) removed the "Igel" chamber from the exp.hall and brought it to Desy back.
 
 
 
 
 
  | 
 
 
SQS und SXP Support , posted by Benjamin Wolf on 12 May 2025, 07:05 
 | 
| Ein Dewar mit Schlauch für SQS befüllt und ein Dewar mit Top Anschluss für SXP befüllt  | 
 
 
SQS support, posted by Orkidia Bilani on 14 Sep 2022, 15:07 
 | 
The cold trap and all the contaminated components (SQS) have being placed in the small washing machine of the vacuum lab.
 
 
Coworkers: Hall Crew and Bianca D.
 
 
  |