SCS have few components to store in XHE1:

QR 44263 (SCS Test Chamber) which was placed by XHCrew inside a wooden box from SCS.

QR 49608 (fast CCD motorized 4DOF-37394) and QR 49609 (Support for mot 5 DOF Detector-37400).

A big Gestell Traverse (QR 49620) in the SCS Hutch craned onto pallets and brought into the LKW Schleuse (pic.3).

This transport will take place on 5.10.2022

Coworkers: S.Menzel, O.Bilani

Until the end of the year SCS needs back from XHE1 to XHEXP1 the components (QR 44265, QR 49608, QR 49609 and QR 49620).

Further, other components will be stored in the XHE1. Details will follow by next week.

Near the SCS Clean Tent, where the big chamber is, below, on the pump there is a control monitor/display. It peeps and perhpas there is something with that.

Supported SCS in their hutch:  craned the DSSC Detector and mounted it on the final operation position.

Coworkers: S.Menzel, O.Bilani, JT. Delitz. L. Le Guyader

SCS gave a box full of consumables for the consumables storage.

Carsten Broers SCS unterstützt.

3 Abstandsplatten getauscht.

Coworkers: Carsten Broers, Frank Siyli

Supported Carsten Broers to unscrew parts of the experimental structure.

Air pad powered instrument move from SCS to the assembly area.

Coworkers: J.T. Delitz, C Broers, F.Siyli 

SCS instrument assembly

The big aluminium plate is mounted

The frame of the clean tent is well moving

Some small tasks are missing and will be done next week

Installation C-Profile

Moving Chamber 1

Moving Chamber 2

Material preparation

Preparation top plate part 1 (drilling, cutting, mounting)

SCS bat um Unterstüzung beim beheben einer defekten Vacuum-Leitung. Der Anschluß war defekt (Leitung abgerissen), die Hall Crew hat einen neuen Anschluß aus dem Vacuum-Lab. besorgt und die Leitung instand gesetzt und wieder angeschlossen.

Mitarbeiter: S.Menzel, M.Lüdeke, J.T.Delitz

Discussed with J.T. Delitz about the transport of their components. He will label the parts and where to be transported. We'll find them tomorrow ready in the hall.

SCS: Brought a chiller and a pallet with boxes with equipment at the warehouse.

A box with equipment from SCS (L. Le Guyader; QR 63576) brought to Ütersen in Block 9 and put inside the grey box where the rest of the same part are stored.

Craned for SCS a component which belonged to Desy users/colleagues.

This will then be transported from SCS back to Desy.

Coworkers: O.Bilani, M.Peter, J.Shima

Supported SCS with craning of a shikane.

Co-workers: O.Bilani, JT.Delitz

SCS Support:

Dismounted and craned the "Chem DPS" from the big "Chem". 

Co-workers: O. Bilani, F. Siyli, JT. Delitz.

Halterung für einen Positionssensor gebaut und diesen am GRD Modul verbaut