In SASE3 one of pipelines of the WeissKlima Technik, are very hot in certain positions. Checked the other pipes of different WeissKlimaTechnik, they do not show any temperature increase (would say similar to the hall temperature).

TS will be informed!

-> Dicsarded empty boxes from the hall.

-> Sorted out a box with screws and washers which was given from instruments to the HallCrew.

Craned for SCS a component which belonged to Desy users/colleagues.

This will then be transported from SCS back to Desy.

Coworkers: O.Bilani, M.Peter, J.Shima

Für IT zwei Paletten auf die Balkonebene mit dem Gabelstapler transportiert.

Coworkers: S.Menzel, M.Peter, T.Piszcek

Die bestellten Alu Platten hat Moritz von der Anlieferung in die Halle transportiert und mit der Montage an das zweite Mobile R+K Regal von SQS angefangen, Sascha kam zum Schichtbeginn dazu. In der Werkstatt XHWS ein 40er R+K Profil auf Maaß zugeschnitten und an das Regal montiert. Den Vorhang montiert Dirk Raiser von SQS.

Coworkers: M.Peter, S.Menzel

Supported SCS with craning of a shikane.

Co-workers: O.Bilani, JT.Delitz

Discussed with T.Mazza on Monday, 30.10.2023, about storing temporarily in XHE1 the wooden boxes of an equipment they recevied recently. 

They should be stored until the equipment is tested and working, so that if something goes wrong, it can be shipped to the manufacturer with the original Verpackung 

If all fine, they will be disposed, most probably by the end of winter maintenance period.

Transport was done!

Co-workers: S.Menzel. O.Bilani, J. Montano

Einen Chiller von einer Palette mittels Hallenkran gekrant.

Coworkers: O.Bilani, S.Menzel, Th.Dietze

Für IT einen Hubwagen für Racks mit dem Gabelstapler in die Balkonebene gehoben.

With P. Vagovic, SPB/SFX, sorted out components and trash from the hall.

Brought the table and the small box (Pic.1) to their Lab 303.

Discarded the things on the trolley and the black transport box was placed near SEC lab, 400 area (Pic.2).

Eine Edelstahlleitung gekürzt und auf Maaß gebogen, diverse Adapter und eine Flexschlauch an die Leitung montiert. Die fertige Leitung angeschlossen und an das R+K Gestell befestigt. Die Leitung und Adapter kamen von P.Schmidt (TS).

Together with P. Vagovic, made ready to transport to XHE1 an optical table (QR 49889)  and a detector assembly (QR 49890), and  supported on their XIM entries.

The transport will take place on Monday, 13.11.2023.

Eine Aluplatte auf ein Gestell mit Stellmotoren gekrant und verschraubt.

Coworkers: S.Menzel, C.Broers

Two pipe transport trolleys  (QR 44462) were transported from external storage Ütersen to LKW Schleuse from TS colleagues. The third one will be transported tomorrow.

Trolleys brought to the experiment hall and placed in the Vacuum assembly area. 

SXP support yesterday (M. Izquierdo) and today (V.Vardanyans) with practical things :-)

Craned the Julabo chiller up to the rarck room for SPB/SFX.

Co-workers: O. Bilani, M. Peter, Th. Dietze

Supported SPB/SFX with craning down the Julabo Chiller from the rack room.

It will be shipped to the manufacturer for repair.

Co-workers: O. Bilani, T. Dietze 

Supported SQS with carrying the top small cabinets and placing them on the bigger ones.

Co-workers: O. Bilani,  M. Peter, A. Igharas, J. Montano

Brought Back from XHE1 into the Experiment Hall the "PAM - Chambers".

Co-workers: O. Bilani, H. Heuer

"Montagehilfe für Cryofan" brought down from the Laser room of HED/HiBEF to the assembly area of HiBEF. 

Mounted partly together and will be transported (next week) back to the external storage in Ütersen.

Co-workers: O. Bilani, S. Arslan, J. Hauser