MID: LN2 Dewars, posted by Orkidia Bilani on 30 Sep 2023, 11:56
|
M. Petrich called in the morning saying that MID needed two more dewars than originally planned.
A. Zouzoulya did write and called that he didn't have access to the LKW Schleuse. So I came as well to support on that and to show him the dewars in the cage, since there were other filled (ohne Schlauch).
When I arrived Sascha was alreaday here and he did fill the two dewars with transferschlauch (#25578 & #25087) for MID.
|
|
SQS Support, posted by Sascha Menzel on 04 Oct 2023, 12:19
|
Für SQS eine Holzkiste 2,4 t aus der Lkw-Schleuse in die XHEXP1 gekrant und mit dem Hallen Gabelstapler in den zugewiesenen Bereich transportiert.
Coworkers: S.Menzel, M.Peter, S.Arslan |
|
SQS Support, posted by Sascha Menzel on 06 Oct 2023, 07:50
|
Kühlwasserschleuche von den Spulen getrennt und aufgenommen. Geliehenen Gardena Schlauch zurück zum Technischen Notdienst gebracht. |
Silikon Oel tropft von der Hallendecke, posted by Sascha Menzel on 10 Oct 2023, 11:06 
|
J.T.Delitz meldete gestern am 09.10 spät Nachmittag an XHCrew, dass eine Flüssigkeit von der Hallendecke Bereich SCS Reinraum/Werkbank tropft. Ein Eimer und Fließ wurden unter gestellt. HallCrew, TS und der TN wurden umgehend informiert.
TS überprüft die Flüssigkeit, es wurde festgestellt das es sich um Silikon Öl handelt. TS hat G.Tillmann darüber informiert, da sich das Labor der Detector Gruppe darüber befinden soll. Es wird von der Detector Gruppe geprüft ob es eine undichte Stelle gibt (Doppelboden).
|
|
Si Oil leakage, posted by Orkidia Bilani on 10 Oct 2023, 18:21
|
D. Lomidze and M. Turcato informed that they found the position/place where the silicon oil leakage was coming from. They are on he way to fix the problem. |
|
SPB/SFX , posted by Orkidia Bilani on 10 Oct 2023, 18:25
|
Talked with P. Vagovic to remove from the experiment hall his setup and a table.
He will write a ticket this week, so that we can tranport it to XHE1 or in Ütersen.
|
|
SPB/SFX Support: Craning, posted by Orkidia Bilani on 11 Oct 2023, 20:51
|
SPB/SFX got a new chiller, which was then craned into the rack room.
The borrowed chiller (the one they borrowed from SCS) was craned out of the rack room.
Coworkers: O.Bilani, S.Menzel, M. Peter, M. Sikorski, T. Dietze
|
|
SASE3, posted by Orkidia Bilani on 13 Oct 2023, 21:04
|
In SASE3 one of pipelines of the WeissKlima Technik, are very hot in certain positions. Checked the other pipes of different WeissKlimaTechnik, they do not show any temperature increase (would say similar to the hall temperature).
TS will be informed!
|
|
Info, posted by Orkidia Bilani on 14 Oct 2023, 18:01
|
-> Dicsarded empty boxes from the hall.
-> Sorted out a box with screws and washers which was given from instruments to the HallCrew. |
|
SCS Support: Craning, posted by Orkidia Bilani on 16 Oct 2023, 16:50
|
Craned for SCS a component which belonged to Desy users/colleagues.
This will then be transported from SCS back to Desy.
Coworkers: O.Bilani, M.Peter, J.Shima |
|
IT Support, posted by Sascha Menzel on 23 Oct 2023, 10:47
|
Für IT zwei Paletten auf die Balkonebene mit dem Gabelstapler transportiert.
Coworkers: S.Menzel, M.Peter, T.Piszcek |
|
SQS Support, posted by Sascha Menzel on 26 Oct 2023, 18:22
|
Die bestellten Alu Platten hat Moritz von der Anlieferung in die Halle transportiert und mit der Montage an das zweite Mobile R+K Regal von SQS angefangen, Sascha kam zum Schichtbeginn dazu. In der Werkstatt XHWS ein 40er R+K Profil auf Maaß zugeschnitten und an das Regal montiert. Den Vorhang montiert Dirk Raiser von SQS.
Coworkers: M.Peter, S.Menzel |
|
SCS Support , posted by Orkidia Bilani on 01 Nov 2023, 09:58
|
Supported SCS with craning of a shikane.
Co-workers: O.Bilani, JT.Delitz
|
|
SQS Support , posted by Orkidia Bilani on 01 Nov 2023, 11:07
|
Discussed with T.Mazza on Monday, 30.10.2023, about storing temporarily in XHE1 the wooden boxes of an equipment they recevied recently.
They should be stored until the equipment is tested and working, so that if something goes wrong, it can be shipped to the manufacturer with the original Verpackung
If all fine, they will be disposed, most probably by the end of winter maintenance period.
Transport was done!
Co-workers: S.Menzel. O.Bilani, J. Montano |
|
SPB/SFX Support, posted by Sascha Menzel on 02 Nov 2023, 14:57
|
Einen Chiller von einer Palette mittels Hallenkran gekrant.
Coworkers: O.Bilani, S.Menzel, Th.Dietze |
|
IT Support, posted by Sascha Menzel on 07 Nov 2023, 13:10
|
Für IT einen Hubwagen für Racks mit dem Gabelstapler in die Balkonebene gehoben. |
|
SPB/SFX Support, posted by Orkidia Bilani on 10 Nov 2023, 11:34
|
With P. Vagovic, SPB/SFX, sorted out components and trash from the hall.
Brought the table and the small box (Pic.1) to their Lab 303.
Discarded the things on the trolley and the black transport box was placed near SEC lab, 400 area (Pic.2).
|
|
SXP Support, posted by Sascha Menzel on 10 Nov 2023, 12:25
|
Eine Edelstahlleitung gekürzt und auf Maaß gebogen, diverse Adapter und eine Flexschlauch an die Leitung montiert. Die fertige Leitung angeschlossen und an das R+K Gestell befestigt. Die Leitung und Adapter kamen von P.Schmidt (TS).
|
|
SPB/SFX Support , posted by Orkidia Bilani on 10 Nov 2023, 14:38
|
Together with P. Vagovic, made ready to transport to XHE1 an optical table (QR 49889) and a detector assembly (QR 49890), and supported on their XIM entries.
The transport will take place on Monday, 13.11.2023.
|
|
SCS Support, posted by Sascha Menzel on 14 Nov 2023, 13:12
|
Eine Aluplatte auf ein Gestell mit Stellmotoren gekrant und verschraubt.
Coworkers: S.Menzel, C.Broers |