Group Selection Page HELP DOC Controls Group Data Analysis Group ITDM WP76 DET Vacuum XRO EEE WP78 WP74 FXE SCS SPB MID HED SQS SXP Sample Environment Photon Commissioning Team Operation PSPO XO TS
Technical integration and coordination SASE1 Status and SASE3 Readiness
  Technical integration and coordination logbook, Contact: A. Violante, G. Wellenreuther  Not logged in ELOG logo
Message ID: 466     Entry time: 06 Nov 2023, 09:53
Author: Frederik Wolff-Fabris 
Location: General 
Severity: Information 
Subject: Notes XO Integration Meeting 06.11.2023 
General Announcement:
- As PRC, Jan G. reports that on Saturday morning no beam permission at the North branch happened. An issue with XTD2 solid attenuator vacuum happened and together with VAC-OCD the threshold was changed 
to allow continuation of beam delivery. A ZZ will be needed today to fix the vacuum leak; 
On Sunday around 09:20 an issue with accelerator quadrupole magnet in A21 caused downtime initially until noon (SA2) and around 16:00 (North branch); also D3 had to come onsite to reset burn through 
monitors in the aftermath.

CTRL:
- Nothing to report.
DA:
- Nothing to report.
EEE:
- MID had couple of uTCA cards offline that needs to be rebooted. This will be discussed with MID offline.

VAC:
- Preparing for the needed ZZs in XTD2.

XPD:
- Nothing to report.

DET:
- Couple of tasks for the DSSC (SQS) to reconfigure the detector;
- DAQ of DSSC was affected by failure of GPFS servers.

ITDM: 
- GPFS issue happened last Friday and was fine over the weekend.
- An update of the clients will happen today in all SASEs. This was agreed with instruments.

XRO:
- Nothing to add to what was reported by the PRC.

LAS:
- SA2 issue with pulse on demand will be discussed with MID.

UNSYS:
- Nothing to report.

SPB:
- User beamtime went OK even with downtimes during weekend.

FXE:
- Nothing to report; last night shift (Sunday night) cancelled as program was finished on Saturday. 

MID:
- Supporting today the short pulses activities; from tomorrow interventions at MID can be scheduled.
- Regarding laser issue: when changing sequence for using Laser showed trains with pulses and trains with missing pulses. Running macro was changed for working to 1 pulse per second.
- Users were happy and the program was accomplished in full.

HED:
- Not present.

SCS:
- Detector tests to be done by end of the week.

SQS:
- Affected by beam losses but overall a lot of useful data was acquired.

SXP:
- Nothing to report.
ELOG V3.1.4-7c3fd00