General Announcement:
- XO reminds the groups to please inform staff to check for self-rescuer training date in the DACHS system. In case this is expired please contact Michael Prollius or SRP 
group.
- Martin Dommach informs fthe access rights to the photon tunnel and accelerator has also expired for several people in August. Please check that.

CTRL:
- Yesterday evening XPD informed on an issue with Karabo GUI for exflgateway. It has been under work. LAS has a work around. CTRL encourages to do not work until it is 
fixed (likely in the next 30 minutes).

DA:
- Nothing to report.

EEE:
- Nothing to report.

VAC:
- Nothing to report.

XPD:
- All is fine. XPD asks CTRL to please send instructions to bypass the Karabo GUI issue mentioned by CTRL. CTRL says it will be fixed in next 30 min.

DET:
- OCD call yesterday has been solved. 

ITDM: 
- Video conferencing system is on the HED control room and under test.

XRO:
- Maintenance in SA1/M3 mirror for Tx spindle took place on Monday as a ZZ. Mirror/spindle seems fine and we did maintenance without affecting mirror position or 
settings. 
XRO waits for spare parts to be delivered for additional maintenance.

LAS:
- SA1 and SA3 lasers are in operation; SA2 laser is in maintenance.

UNSYS:
- Problem with SA2/cell31 is serious: the complete bus terminals are damaged in the rack. Currently SASE2 works up to cell 31.
- New set of terminals is needed from Bekhoff to replace the full instance of the rack. Suren K. will inform on updates/status and when parts arrive for asking tunnel 
access. 
The old ZZ request is still valid. Order will be placed soon and Beckhoff promises delivery in one day after receiving order. 

SPB:
- Minor Problem with one motor but it is under investigation. 

FXE:
- Problem with a motor: EEE is informed and today they will check it.
- Andreas G. asks if FXE sees changes on mirror positions due to Monday maintenance. Martin K. will inform the group to verify during the night shift.

MID:
- Not present.

HED:
- M3 re-alignment is very good. HED get the first Mono aligned and continues today with preparations/alignment. 
- Thomas Preston says issues with a motor stages is under investigation (it worked in the past).

SCS:
- Yesterday morning machine had tuned beam to SCS photon energies. Somewhere this has been lost and SCS and BKR had to do it again on the afternoon. PRC will investigate 
with RCs.
- Smaller issue: For 2x already there is an issue with pulses that DSSC send to online read (sometimes we get only 8 pulses). 
DA states it is related to the calibration pipeline when this is reset (default is 8). 
One has to change/correct manually in the config manager. DET asks SCS to place a ticket for the support. 
SCS plans to use DSSC for user experiment this week. It is not critical issue but it would be nice to fixed for once.

SQS:
- Preparing for user's time on next week. SQS has commissioned the Monochromator with grating for the first time.