SASE1 Experiments

Due to the interlock PLCs reprogramming, the emergency off circuit will be triggered tomorrow and power cuts will occur. Due to that, the AGIPD in SPB is being put into a safety state. ITDM and AE are informed. FXE and Optical lasers were also informed. The order is: Experiment in a safe state==>PLCs switched off==>Servers switched off. 

SPB will put all the motors to zero position and the parameters will be saved by a script prepared by CAS (AS). 

Next week Mon-Wed the planned power cut will also occur. 

SCS

• Control room being put into operation - New cables to arrive soon. AE addressing the so far known issues.

AE

• SASE2 MOV2 loop is up.
• Master timing will be down due to maintenance by DESY on Thursday, from 9:00 to 17:00

ITDM

• GPFS ran out of space in the week end. ITDM/DET/CAS meeting tomorrow. Then the experiments will be presented a way to go.

• On Monday we would like to replace the dns/dhcp server in the balcony room. In principle we have the secondary one working at DESY but experience shows everything gets slow and in particular Karabo may have big problems. Due to the power off in SASE1, this will be scheduled for monday afternoon.

CAS

• Issues with DAQ observed. Conflict on data aggregators. This was found to be a typo in the DAQ code. Fixing of the DAQ required but the release of Karabo 2.2.4. can proceed.
• Coordinated motion for SPB, SCS, SQS: Follow up tests by AE to be done this week.