General

• The latency observed by SPB in the GUI client has been almost completely fixed. Still some "freezing" from time to time remains.
• DAQ tests in FXE with LPD worked for 12/16 of the detector. Trigger's signal stability issue being addressed by AE.
• XTD 9 and 10 will remain open from 25.07. at 7:00 to 26.07. at 14:00  
• On Wednesday afternoon the machine will be prepare to lase with 30 bunches in order to allow the radiation measurements in SASE1 Exp. Hall on Thursday and Friday.

XTDs

• Fast valve in XTD9 still has issues with noise. Issue will be addressed tomorrow with AE support.

SPB

• Integration of the turbo pumps in  the VAC loop ongoing.
• Chiller control being included in Loop 5
• Firmware for the AGIPD hv power supply was updated. The spikes during ramping are gone
• SMARACT motors being implemented. (depend on Loop 13)
• Work on in vacuum interlock in SPB will probably start this week.
• Some problems with Karabo (While measuring profiles the level scaling does not work, Region of interest values wrong) have been reported to CAS.