Tunnels XTD2 and XTD4 are closed, XTD9/10 remain open

Vacuum:

• Running stably
• Work continues on M3 in XTD9 and on the vacuum in XTD10 

EPS Loop:

• Input from undulator still missing. This requires  fixing a cable in balcony rooms and then testing

PBLM/Motion Loop:

• Work on the PBLM motors (ELMO controller) continues.
• It appears that the uneven movement is due to improper setting of motor parameters

Imagers

• Trigger problem reported yesterday was due to a cabling issue. Apparently during work on the relevant rack cables were unplugged and then wrongly put back
• Network issue with pop-in (245) in XTD9 solved

SPB Tunnel components

• Crate with "problem on signal pins" was brought to the lab and checked. Everything was ok. Problem was due to spurious measurement.

Karabo:

• PSLIT was tested successfully yesterday
• Behaviour of Karabo when a loop goes down needs to be made more graceful. 
• Cleanup continues

Tasks for today:

Note: All loops should be left running and no changes to Karabo.

• Prepare mirror M3 installation
• Continue testing of PBLMs in XTD9
• Continue testing of SPB tunnel loop

Other topics

• None