Upgrade of AnaPico APPH6040 software, posted by Patrick Gessler on 26 Oct 2013, 11:06
|
I upgraded the GUI for the phase noise analyzer APPH6040, as a new feature had been added after our request: manual definable IP address/host name for
the device. Before, the GUI only checks for broadcasts of the device and did not allow manual definition. As a result, no device was seen, as the analyzer
is located in the lab net and the labpc is in the office net. Not it woks fine! |
Signal Source Analyzer APPH6000, posted by Kai-Erik Ballak on 05 Sep 2013, 15:13
|
The Signal Source Analyser APPH6000 with S/N: 233-014102500-0081 from AnaPico is now at
|
External Timing Adapter, posted by Kai-Erik Ballak on 19 Sep 2013, 13:04
|
I gave to Christoph Stechmann (christoph.stechmann@desy.de) from MCS six External Timing Adapters (TTL-Clock- /Trigger-PCBs in housing). With S/N: 1,
13, 15, 17, 19, 21 |
Präzisionsklimagerät, posted by Kai-Erik Ballak on 30 Sep 2013, 13:11
|
Now min. 20.0°C and max. 22.0°C. |
USB data logger temperature/humidity, posted by Kai-Erik Ballak on 12 Nov 2013, 13:53
|
ELV USB data logger temperature/humidity UTDL10 with S/N: 1300438
Hangs now on Rack #2. |
MSO9404A Infiniium MSO - 4 GHz, 10/20 GSa/s, 4+16 Ch, posted by Kai-Erik Ballak on 14 Nov 2013, 10:12
|
MSO9404A Infiniium is back from Agilent. Arrived: 13/11/2013
Service order 1-5520744915-1 details
Fault description
Failure: Immer häufiger fällt dort die horizontale Verschiebung für den 2. Kanal aus. Erst wenn das Gerät aus- und eingeschaltet |
Netzwerk Hardware RJ45 -> 300m, posted by Frank Babies on 22 Aug 2013, 13:56
|
Netzwerk Verbindungen länger 30m.
Zusätzliche Info!
Es gibt extra RJ45 Kupplungen die die Masse (bzw. den Schirm) nicht mit durch schleifen. |